Ricerca prodotti

Separate actuator, radius actuator left for position switch with tumbler 3SE5312/3SE5322 and as-i 3sf13 and position switch with separate actuator 3SE51/3SE52 and as-i 3sf11/3sf12

Actuator head for position switch 3SE51 Angular roller lever, metal lever with plastic roller 22 mm functional at -40 °C

Separate actuator, universal radius actuator heavy duty version vertically and horizontally adjustable, l= 67 mm for position switches with tumbler 3SE5312../3SE5322.. and asi 3sf13... and position switches with separate actuator 3SE51../ 3SE52.. and asi - with separate actuator 3sf11../3sf12..

Separate actuator for 3se324 and 3se325 ball detent (up to 100n)

Separate actuator for 3se324 and 3se325 standard actuator

Acc_switch 3SE5000-0av03-

Actuator head for position switch 3SE51/52 roller lever, form e, with metal lever and plastic roller 13 mm according to en 50047

Actuator head: spring rod for position switches 3SE51/52 only with snap-action contacts, total length 142.5 mm, plunger = 50 mm, plunger = 50 mm, made of plastic

Highest cybersecurity levels using ZBRZ1 tool Designed for industrial environment with proven robustness with Zigbee Green Power using ZBRZ1 tool Possibility to change frequency and highest cybersecurity level Suitable for the most demanding environments, depending on the model, up to IP 69, for external use from -40 to 70 °C Compatible with all XB5 & XB4 actuators(not suitable for safety applications) Possibility to change frequency and highest cybersecurity level Wireless and batteryless pushbuttons including a transmitter equipped with fixing collar a spring return pushbutton head with cap attached

Actuator head for position switch 3SE51 Angular roller lever Stainless steel lever with Plastic roller 22 mm

Actuator head for hinge switch made of plastic with solid shaft diameter = 10 mm and actuating angle 10¦

Actuator head for position switch 3SE51/52 roller plunger, form c, with stainless steel roller 10 mm according to en 50047

Actuator head for position switch 3SE51/52 roller plunger, form c, with plastic roller 10 mm according to en 50047

Separate actuator for 3se324 and 3se325 universal radius actuator

SIMATIC dp, PROFINET interface module im154-4 pn, high feature for et 200pro, integrated switch, inclusive terminating module, connecting module im pn 6ES71944a.000aa0 must be ordered separately

Separate actuator, radius actuator right for position switch with tumbler 3SE5312/3SE5322 and asi 3sf13 and position switch with separate actuator 3SE51/3SE52 and asi 3sf11/3sf12

The MXSL is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. The ports and stroke adjuster positions are located opposite from the standard MXS in a symmetrical or mirror image of each other to minimize clearance for adjacent mounting applications. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5mm, 0-15mm and 0-25mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The series CU single rod, double acting free mount cylinder saves space and allows direct and precise mounting. It is available in 6mm to 32mm bore sizes with stroke lengths up to 50mm. Options include auto-switch capabilities, free mount choices, recessed switch mounting grooves and rubber bumpers standard.

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.