Ricerca prodotti

Separate actuator for 3se324 and 3se325 ball detent (up to 100n)

Separate actuator, universal radius actuator heavy duty version vertically and horizontally adjustable, l= 67 mm for position switches with tumbler 3SE5312../3SE5322.. and asi 3sf13... and position switches with separate actuator 3SE51../ 3SE52.. and asi - with separate actuator 3sf11../3sf12..

Actuator head for position switch 3SE51 Angular roller lever, metal lever with plastic roller 22 mm functional at -40 °C

Separate actuator, radius actuator left for position switch with tumbler 3SE5312/3SE5322 and as-i 3sf13 and position switch with separate actuator 3SE51/3SE52 and as-i 3sf11/3sf12

Acc_switch 3SE5000-0av03-

Separate actuator for 3se324 and 3se325 standard actuator

Actuator head: spring rod for position switches 3SE51/52 only with snap-action contacts, total length 142.5 mm, plunger = 50 mm, plunger = 50 mm, made of plastic

Actuator head for position switch 3SE51 Angular roller lever Stainless steel lever with Plastic roller 22 mm

Actuator head for hinge switch made of plastic with solid shaft diameter = 10 mm and actuating angle 10¦

Actuator head for position switch 3SE51/52 roller plunger, form c, with stainless steel roller 10 mm according to en 50047

The C85 series single rod, double acting, conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable piston rod seals, the C85 offers exceptional service life.

Standard double acting, single rod version of the CQ2 compact cylinder. The CQ2 is available in bore sizes from 12mm to 100mm. It comes standard with male or female piston rod threads. It is possible to mount auto switches on any of the 4 surfaces.

The C85 series add on piston rod knuckle joints.

The floating joint series JA (standard) and JAH (heavy duty), can absorb any off-centering or loss of parallel accuracy between the cylinder and the driven body. Because of this, centering is unnecessary, installation time is drastically reduced, and a high level of machining accuracy is unnecessary.

The JB series floating joint was designed for compact cylinders. JB series is compact and is suitable for high tensile stresses. Long life is established with a dustproof cover and the rotation angle is 5 .

The JB series floating joint was designed for compact cylinders. JB series is compact and is suitable for high tensile stresses. Long life is established with a dustproof cover and the rotation angle is 5 .

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.

The MXS is a precision slide table integrated with guides and rails combined with cross roller bearings to isolate the load bearing from the movement of the dual rods and piston seals. Rubber bumpers or shock absorbers stop the slide table and can be paired with a stroke adjuster for precise positioning; available for extend, retract, or both ends in ranges of 0-5 mm, 0-15 mm and 0-25 mm. The end lock option prevents the slide table from dropping in vertical applications, enhancing safety in the event of air pressure loss.