Ricerca prodotti

SIRIUS soft starter 200-480 V 250 A. 24 V AC/DC spring-type terminals Thermistor input

Smart Motor Controller, 30A, 480V, 3-Phase, 50/60Hz, 24V AC/DC, Open

This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 3000RPM and keyed shaft end with holding brake. It is an equipped with a 20bit single-turn absolute encoder. It is a second generation servo motor with a rated supply voltage of 220V, a continuous stall current of 9.95A and a continuous power of 2000W. The shaft dimensions are 22mm (diameter) x 55mm (length). It is furnished with MIL connector for electrical connection. It is an IP50 and IP65 rated product. The length of this product is 216mm and the centering collar dimensions are 8mm (depth) x 110mm (diameter) with 145mm mounting hole. It weighs 11kg. It is suitable for machine control solutions. This range is compatible with Lexium 28 servo drives. This product is compatible with LXM26D servo drive motor at 2kW 220V three phase. It supports 130mm Asian standard flange mount with a natural convection cooling system. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

SIRIUS soft starter 200-480 V 840 A. 24 V AC/DC Spring-type terminals

SIRIUS soft starter 200-600 V 113 A. 110-250 V AC spring-type terminals Thermistor input

SIRIUS soft starter 200-690 V 113 A, 24 V AC/DC spring-type terminals

MOTOR OPERATOR 24V DC XT2-XT4

Direct starter, 3RM1, 500 V, 0.55 - 3 KW, 1.6 - 7 a, 24 V DC, screw/spring-type terminals

SIRIUS soft starter 200-480 V 171 A. 110-250 V AC spring-type terminals Thermistor input

SIRIUS soft starter 200-600 V 77 A. 110-250 V AC Screw terminals Analog output

Gateway for the connection of up to 32 INTERFACE system devices to a higher-level controller via CANopen®. The INTERFACE system devices are connected to the Gateway via DIN rail connectors, the DIN rail connectors are provided.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. DeviceNet protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 1.35 to 27 amperes. 120 to 240 VAC is used to power this controller. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.