Ricerca prodotti

PCB headers, nominal cross section: 6 mm², color: green, nominal current: 41 A, rated voltage (III/2): 630 V, contact surface: Tin, type of contact: Male connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: PC 5/..-G, pitch: 7.62 mm, mounting: Wave soldering, pin layout: Linear three-way pinning, solder pin [P]: 5 mm, number of solder pins per potential: 3, plug-in system: COMBICON PC 5, Pin connector pattern alignment: Standard, locking: without, mounting: without, type of packaging: packed in cardboard

Basic pliers, for accommodating dies for a wide range of type of contacts

Conversion kit for CF 1000-10, for insulated ferrules according to DIN 46228-4: 1990-09, cross section range: 10 mm², stripping length: 12 mm

Plastic thread adapter with bayonet lock, for EVO housing series B, M20 thread

RIF-0... relay base, for miniature power relay with 1 N/O contact or solid-state relays of the same design, push-in connection, for mounting on NS 35/7,5

TeSys enclosed starters, empty enclosure, for thermal magnetic circuit breakers GV2ME. Flush mounting enclosure, sealable cover. Polycarbonate enclosure, double insulated with protective conductor, IP41 protection front face. To be equipped with a motor circuit breaker GV2ME, and start-emergency stop buttons GV2K (to be ordered separately). Possible mounting of 1 side auxiliary contact blocks GVAD, GVAM, GVAD on both sides of GV2ME (to be ordered separately). It conforms to IEC 60947-2 and IEC 60947-4-1, Green Premium compliant (RoHS/REACh).

Fan for SIRIUS soft starter 3RW403 s2, 3RW404 s3

Spacial SF brackets for fixing mounting plates back to back. . Mounting location is On structure of enclosure, On 2 mounting plates back to back position. Adjustable with a pitch of 25 mm. Fixing by elements. Steel made, zinc coated surface finish. 4 brackets included.

ABS industrial box for Thalassa TBS. Multi purpose. 241 x 194 x 107 mm. Wall mounted on enclosure. One piece moulded. Lock by Captive screw flat outside sealed area. Cover fixing by 4 plastic screws. Protection IP 66, IK07, electrical insulation class 2.

Spacial S3D wall mounted steel enclosure with plain door. 500 x 500 x 250 mm. Single piece body, mounting plate included. 3 mm double bar lock insert. Steel made, epoxy-polyester powder finish. Protection IP 66, IK10, Grey RAL 7035.

RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5

SITOP BUF8600 100MS BUFFER MODULE FOR PSU8600 BUFFER CAPACITY 100 MS/40 A

TeSys F power terminal protection shrouds, for 4-pole contactors LC1 F2254, F2654, F3304, F4004, F5004 and CR1 F2654, F4004, F5004. Set of 8 units. The shrouds protect against direct contact on terminals by providing a front face IP20 protection. One shroud per power terminal, to be attached to the connection screw of the terminal. Green Premium compliant (RoHS/REACh).

Replacement part for the PPS CDM CH, counter support for the cutting knife

The BRIDGE COVER covering hood is used to cover unused plugs on the CONTACTRON bridge that may subsequently be used to extend the system. The hood can be used with the screw and Push-in version of the bridge.

VZ10 is a 3-pole terminal protection shroud for TeSys Vario switch-disconnectors from Schneider Electric. To be used with V5 and V6 switch bodies. The shroud protects against direct contact on terminals by providing a front face IP20 protection. Green Premium compliant (RoHS/REACh).