PLC

Contactor,IEC,Sirius,Standard 3 Pole,Non-Reversing 110 - 127 AC/DC Coil Frame Size S6,150A Panel Mount 2 NO & 2 NC Auxiliaries No Suppression Lugs (Not Included) Terminals UL File E31519 in Vol.11 Sec. 5

The F204 A-25/0.03 Residual Current Circuit Breaker 4P A type 30 mA from ABB is designed to provide maximum protection for people and installations against fault currents to earth. This device is part of the F200 series, known for its reliability and efficiency in safeguarding electrical systems. The series offers a wide range of standard instantaneous and selective AC and A types, ensuring comprehensive protection for various applications.Key Features:Instantaneous and selective AC and A typesHigh reliability in fault current protectionSuitable for various special applicationsThe F204 A-25/0.03 RCCB is ideal for ensuring safety in residential, commercial, and industrial environments. Its robust design and advanced technology make it a trusted choice for electrical protection.

SINAMICS G120X Potenza nominale: 110 kW Al 110% 60s, 100% 240 s Non filtrato 380-480 V 3 AC +10/-20% 47-63 Hz Temperatura ambiente -20 a +45 °C Dimensione: FSF Grado di protezione IP20 / UL tipo aperto Finitura verniciata 3C2 Con pannello operativo di base Senza espansione IO Bus di campo integrato: PROFINET PN, Ethernet IP Parte di ricambio: solo tipo preferito 6SL3220-3YE46-0UF0. Le MLFB all'interno delle MLFB 6SL32.0-.YE46-.UF0 possono essere accreditate. SIOS 109761925 Parte di ricambio: solo tipo preferito 6SL3220-3YE46-0UF0. Le MLFB all'interno delle MLFB 6SL32.0-.YE46-.UF0 possono essere accreditate. SIOS 109761925

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This high speed counter module has 2 channels, 6 inputs and 2 outputs. It is a counter module with an I/O voltage of 24V DC and a current consumption of 100mA at 3.3V DC bus, 40mA at 24V DC rack, 80mA at 24V DC sensor. Counter functions are loop (modulo) counting, width modulation, down counting etc. This product is robust, high quality and based on the latest innovative technology. It is furnished with 10-pin connector with for wiring auxiliary input and sensor power supply, 16-pin connector for wiring the sensors of counter 0 and 16-pin connector for wiring the sensors of counter 1. It is an IP20 rated product. It weighs 0.112kg. It is suitable for medium to large process applications. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This input compatible with 19.2V to 30V 2-wire/3-wire proximity sensor, incremental encoder with push-pull outputs, 10V to 30V totem pole. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The Schneider Electric TSXDMZ28DTK Discrete I/O Module is designed for high-performance industrial automation applications. This module is part of the Modicon TSX Micro automation platform and offers reliable and efficient control of discrete inputs and outputs.Key Features:16 discrete inputs and 12 discrete outputs24 V DC positive logicHigh-speed response timeRobust design for industrial environmentsPerfect for:Manufacturing automationProcess controlIndustrial machinery

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 4.21 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. This is a bus coupler designed for creating distributed IO islands on Sercos 3 fieldbus, for exchanging data between controllers and distributed IO. The Sercos 3 communication protocol is the client/server type with Request/response. This is a bus coupler module designed for creating distributed IO islands on SERCOS 3 fieldbus. This bus coupler works with an electronic power distribution module, a bus base and a terminal block. It has 2 parallel RJ45 connectors, RS 485 with a 1,2 to 38,4kBaud data transmission rate. It weighs 0.080kg. It measures 25mm wide, 99mm high, 75mm deep. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. It is compatible with PacDrive LMC Eco/Pro2 motion controllers, and the Modicon M262 logic/motion controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

The SITOR fuse link is a high-performance component designed to handle demanding electrical loads. It features blade contacts for easy installation and operation, and is rated at 800A with a gR current rating. The device is also capable of handling uninterrupted AC voltage up to 600V and DC voltage up to 440V. With its front indicator, the fuse link provides clear visual feedback on its status.The SITOR fuse link is a reliable choice for applications requiring high current capacity and robust performance. Its NH3 design ensures long-lasting durability and efficient heat dissipation. The device's blade contacts facilitate easy maintenance, making it an ideal solution for industrial environments where frequent access is required.

The TeSys D contactors are engineered to provide perfect compatibility with various control systems. They can be employed to create motor starters for a wide range of applications. These contactors come in 13 different ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This particular model is a 32A inductive 3 pole IEC contactor. It can be mounted on DIN rail or directly onto a panel. The contactor offers both Horsepower and Kw motor ratings for international acceptance. It is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC, and 30HP at 600VAC three phase. For single-phase applications, it is rated for 2HP at 115VAC and 5HP at 240VAC.When paired with a 480VAC up to 60A circuit breaker, this contactor can handle SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, it can handle SCCR up to 100kA. The contactor comes with a 42 VAC 50/60 Hz coil. It has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections.This contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.83 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the requirements of RoHS/REACh, making it a Green Premium product.

This Schneider Electric Zelio Logic SR2 discovery pack compact smart relay / programmable controller uses a supply voltage of 100 to 240 volts alternating current, has 12 inputs / outputs. It also comes with screw-clamp terminals and has an integrated LCD display. This compact programmable relay discovery pack is ideal for discovering the Zelio Logic range of programmable smart relays. It has compact form-factor, allowing installation on DIN rail. It also offers simple programming, display and diagnosing of malfunctions display and navigation buttons. Discovery package includes one copy of Zelio Soft and one USB cable to connect the relay to your PC. Simple ladder programming, adapted for non-specialists. Discovery package, coming with Zelio Soft programming software, the simplest way to learn and use this relay. Built-in EEPROM flash memory for data backup up to 10 years, easy-to-recover after a power shortage or incident. This product is certified by C-Tick, GL, UL, CSA and GOST. It meets EN/IEC 60068-2-6 Fc and EN/IEC 61000-4-11 standards. Easy to use, Zelio Logic provides a real alternative solutions based on cabled logic or specific cards.

The Ethernet Switchboard Display Module FDM121 is a versatile and reliable device that is part of the EnerlinX communication system. This module is compatible with Masterpact, Compact, and PowerPact circuit breakers, allowing for seamless integration into existing systems. The FDM121 displays critical data from one connected device over ULP, providing valuable insights for efficient management. Its high-resolution LCD screen with white backlighting offers clear visibility in various lighting conditions. The module is equipped with a 24VDC terminal block and two RJ45 sockets for easy connection to the network. It can be installed in a switchboard through either a standard door cut-out or two 22mm diameter holes, making it a flexible solution for different environments. With an operating temperature range of -10°C to 55°C and a protection degree of IP54 on the front face, the FDM121 is designed to withstand harsh conditions while maintaining optimal performance. This module is part of the EcoStruxure Power architecture and Ethernet ready smart panels, ensuring seamless integration into existing systems. The firmware can be updated using EcoStruxure Power Commission software, allowing for easy maintenance and updates.

The Schneider Electric TeSys GV2 is a manual starter and protector, specifically designed for high starting current peak motor applications. This 3-pole device offers a thermal-magnetic protection with a setting range of 6-10A and a magnetic tripping level at 20xIn. It also boasts a high breaking capacity of Icu 100kA@400V. The TeSys GV2 is equipped with screw clamp terminals for easy connection. Its start-stop control is guaranteed for 100,000 cycles AC-3. This product can be used for protection of 3-phase transformer applications and is multi-standard certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This Schneider Electric Zelio Logic SR3 Ethernet Communication Interface uses a supply voltage of 24 volts direct current. It is compatible with Ethernet. This Ethernet Communication Interface adds Ethernet communication functionality to a Zelio Logic relay. It allows the relay to be monitored and controlled remotely. Simple ladder programming, adapted for non-specialists. Discovery package, coming with Zelio Soft programming software, the simplest way to learn and use this relay. Built-in EEPROM flash memory for data backup up to 10 years, easy-to-recover after a power shortage or incident. More I/O than SR2 model, for larger applications. This product is certified by GOST, C-Tick, UL, GL and CSA. It meets EN/IEC 61000-4-4 level 3, EN/IEC 61000-4-5, EN/IEC 61000-4-2 level 3, EN/IEC 61000-4-3, EN/IEC 60068-2-6 Fc and EN/IEC 60068-2-27 Ea standards. This product is compatible with all modules with 24V supply SR3 BxxxBD. Simple to select, install and program, Zelio Logic is suitable for all your applications. Flexible, it offers you the choice of 2 ranges, compact or modular, extendable and 2 programming languages (FBD or LADDER). Easy to use, Zelio Logic provides a real alternative to solutions based on cabled logic or specific cards.

The F202 A-40/0.03 Residual Current Circuit Breaker 2P A type 30 mA from ABB is designed to provide exceptional protection for people and installations against fault currents to earth. This RCCB is part of the F200 series, known for its comprehensive range of standard instantaneous and selective AC and A types, as well as configurations for special applications.Key Features:Compliance with IEC/EN 61008 and UL 1053 standardsRated voltage of 230 V and rated current of 40 AHigh electrical endurance with up to 10,000 cyclesMounting type: DIN-RailEnvironmental Product Declaration (EPD) availableApplications:The F202 A-40/0.03 RCCB is ideal for residential, commercial, and industrial installations where protection against earth fault currents is crucial. Its robust design and high reliability make it suitable for various applications, ensuring safety and compliance with international standards.

MIN. ORDERING QUANTITY: 20 M MAX. CONSIGNMENT: 2000 M, CAT. 5, SOLD BY THE METER APPLICATION, 4-WIRE, SHIELDED, FC OUTLET RJ45, FOR UNIVERSAL FOR CONNECTION TO CABLE, TP INSTALLATION CABLE SIMATIC NET, IE FC TP STANDARD

The SIMATIC ET 200SP is a versatile and high-performance PROFIBUS bundle IM designed for industrial automation. The IM 155-6DP HF interface module supports up to 32 I/O modules and 16 ET 200AL modules, offering exceptional flexibility and scalability for various applications.Key Features:Supports up to 32 I/O modules and 16 ET 200AL modulesMulti-hotswap capability for seamless module replacementIncludes interface module (6ES7155-6BU01-0CN0), server module (6ES7193-6PA00-0AA0), and PROFIBUS connector (6ES7972-0BB70-0XA0)Ideal for:Industrial automationManufacturing processesControl systems

The SIMATIC DP Connecting Block ECOFAST is designed to facilitate the connection of the ET200ECO system. This block features 2x ECOFAST connections RS485, ensuring efficient communication and data transfer. The ID connector for PROFIBUS DP allows for seamless integration with other devices in a PROFIBUS-DP network. The address setting feature enables easy configuration of the device within the system.This product is a crucial component in industrial automation systems, enhancing connectivity and data exchange capabilities. Its robust design and advanced features make it an ideal choice for engineers and integrators looking to optimize their automation processes.

SIMATIC ET 200SP, modulo di ingresso digitale, DI 16x 24V DC Standard, tipo 3 (IEC 61131), ingresso a collettore aperto, (PNP, P-lettura), unità di confezione: 1 pezzo, adatto per tipo BU A0, codice colore CC00, tempo di ritardo ingresso 0,05..20ms, diagnostica interruzione filo, diagnostica tensione di alimentazione

The Protective Film Type 5 is designed to provide a complete coverage over the full area of a reflection shield matte. This protective layer ensures that the underlying surface remains protected from any potential damage or wear. Further information regarding the quantity and content can be found in the technical data provided.