Ricerca prodotti

TeSys GV motor circuit breaker, 3 poles (3P), 0.25A/690V, for 3-phase motor applications 0.06kW@400V. It provides a thermal-magnetic protection with a thermal setting range 0.16-0.25A, magnetic tripping at 9xIn, high breaking capacity Icu 100kA@400V. Connection by screw clamp terminals. Start-stop control by rotary knob guaranteed for 100 000 cycles AC-3. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX), Green Premium compliant (RoHS/REACh).

Screw terminals 200-460 V AC, 115 V AC, common-3 45a, 30hp, standard 26a, 15hp, values with 460 V, 50 deg., SIRIUS soft starter

Han® High Density module, Crimp termination, Male, Contacts: 25, Conductor cross-section: 0.09 ... 0.52 mm², Rated current: ‌4 A, Polycarbonate (PC), RAL 7032 (pebble grey)

SIRIUS SOFT STARTER, VALUES AT 575V, 50DEG., STANDARD: 712A, 800HP, ROOT-3: 1233A, 1350HP, 400-600V AC, 115V AC, SPRING TERMINALS

Contact insert module, number of positions: 4, power contacts: 4, control contacts: 0, Socket, Crimp connection, 690 V, 40 A, 1.5 mm² ... 6 mm², application: Power

Contact insert module, number of positions: 4, power contacts: 4, control contacts: 0, Pin, Crimp connection, 690 V, 40 A, 1.5 mm² ... 6 mm², application: Power

SINAMICS g120 power module pm240-2 with built in cl. a filter with built in braking chopper 3AC380-480v +10/-20% 47-63HZ output high overload 22KW for 200% 3s,150% 57s,100% 240s ambient temp -20 to +50 deg c (ho) output low overload 30KW for 150% 3s,110% 57s,100% 240s ambient temp -20 to +40 deg c (lo) 472 x 200 x 237 (hxwxd), fsd protection IP20 without control unit and panel approved for cu firmware- version v4.7 hf8

Circuit-breaker sz s00, for motor protection, class 10, a-release 9..12.5a, n-release 156a, screw connection, standard sw. capacity

SINAMICS g120 power module pm250 with built in cl. a filter possibility of regeneration 3AC380-480v +10/-10% 47-63HZ output high overload 75KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c output light overload 90KW for 150% 3s,110% 57s,100% 240s ambient temp -10 to +40 deg c 934 x 350 x 316 (hxwxd), fsf protection IP20 without control unit and bop

Contact insert module, number of positions: 3+4, power contacts: 3, control contacts: 4, Pin, Crimp connection, 500 V, 40 A, 1.5 mm² ... 6 mm², application: Power/signal

Please use the following items in new systems: 1066703, 1066716, 1066718, 1066714.Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12 - 24 V DC, output: 24 V DC/1 A

HEAVYCON pin contact insert module, D-SUB 9, crimp connection, for two conductors, without crimp contact

HEAVYCON female insert, K8/24 series, for 8 power and 24 control contacts, crimp connection

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

SIRIUS SOFT STARTER, VALUES AT 575V, 50DEGREES, STANDARD: 850A, 950HP, INSIDE-DELTA CIRCUIT 3: 1472A, 1650HP, AC 400-690V, AC 115V, SCREW TERMINALS