Fluke
374 FC
The Fluke 374 FC offers advanced troubleshooting performance and is now part of the Fluke Connect® family of wireless test tools.
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Capacitance
- Accuracy
- 1% ±4 digits
- Resolution
- 1 μ F (≤ 1000 μF)
- Resolution
- 0.1 μF (≤ 100 μF)
- Range
- 1000 μF
DC Voltage
- Range
- 1000 V
- Accuracy
- 1% ±5 digits
- Resolution
- 0.1 V (≤600.0 V)
- Resolution
- 1 V (≤1000 V)
mV dc
- Range
- 500.0 mV
- Accuracy
- 1% ±5 digits
- Resolution
- 0.1 mV
Mechanical Specifications
- Size (L x W x H)
- 249 x 85 x 45 mm
- Operating humidity - non-condensing (< 10°C)
- ≤45% RH (at 40 °C to 50 °C)
- Operating altitude
- 3000 m
- Weight
- 395 g
- Jaw opening
- 34 mm
- Flexible current probe cable length (head to electronics connector)
- 1.8 m
- Safety
- IEC 61010-1, Pollution Degree 2
- Storage altitude
- 12,000 m
- Operating humidity - non-condensing (< 10°C)
- ≤75% RH (at 30 °C to 40 °C)
- Storage temperature
- -40 °C to +60 °C
- Safety
- IEC 61010-2-033:CAT III 1000 V / CAT IV 600 V
- Radio Frequency Certification FCC ID
- T68-FBLE IC:6627A-FBLE
- Safety
- IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
- Flexible current probe diameter
- 7.5 mm
- Batteries
- 2 AA, NEDA 15A, IEC LR6
- Operating temperature
- -10 °C to +50 °C
- Operating humidity - non-condensing (< 10°C)
- ≤90% RH (at 10 °C to 30 °C)
- Maximum voltage between any terminal and earth ground
- 1000 V
- IP rating
- IEC 60529: IP30, non-operating
AC Voltage
- Accuracy
- 1.5% ±5 digits (20 Hz to 500 Hz)
- Resolution
- 1 V (≤1000 V)
- Range
- 1000 V
- Resolution
- 0.1 V (≤600.0 V)
Electromagnetic Compatibility (EMC)
- USA (FCC)
- 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
- International
- IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2
- Korea (KCC)
- Class A Equipment (Industrial Broadcasting & Communication Equipment)
- International
- Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.
- International
- CISPR 11: Group 1, Class A
- Temperature coefficients
- Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
- Korea (KCC)
- Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
- International
- Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
AC Current via Flexible Current Probe
- Range
- 2500 A
- Resolution
- 1 A (≤ 2500 A)
- Accuracy
- 3% ±5 digits (5 – 500 Hz)
- Resolution
- 0.1 A (≤ 600 A)
- Crest Factor (50/60Hz)
- 1.42 at 2500 A
- Crest Factor (50/60Hz)
- Add 2% for C.F. > 2
- Crest Factor (50/60Hz)
- 2.5 at 1400 A
General Specifications
- Crest Factor (50 Hz/60 Hz)
- Add 2% for C.F. >2
- Resolution
- 0.1 A
- Range
- 600.0 A
- Crest Factor (50 Hz/60 Hz)
- 2.5 @ 600 A
- Accuracy
- 2% ±5 digits (10 Hz to 100 Hz)
- Accuracy
- 2.5% ±5 digits (100-500 Hz)
Resistance
- Accuracy
- 1% ±5 digits
- Resolution
- 0.1 Ω (≤600 Ω)
- Range
- 6000 Ω
- Resolution
- 1 Ω (≤6000 Ω)
DC Current
- Accuracy
- 2% ±5 digits
- Resolution
- 0.1 A
- Range
- 600.0 A
Altre categorie
AttuatoriBlocchiCavi, tubi e tubi flessibiliCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro