5606-50-X

General Specifications

Minimum insulation resistance

20 MΩ at 23°C

Temperature range

-200°C to 160°C

Accuracy1

±0.04°C at 0.01°C±0.06°C at 160°C

Temperature coefficient

0.00385 Ω/Ω/°C

Sheath diameter

3.1 mm ±0.1 mm (1/8 in ±0.004 in)

Lead-wire cable type

Enameled copper wire

Response time5

12 seconds typical

Calibration

Calibration not included. NVLAP accredited calibration available. See ordering information.

Sensor length

30 mm ±3mm (1.2 in ±0.1 in)

Hysteresis

±0.015°C

Short-term repeatability2

±0.03°C at 0.01°C±0.04°C at 160°C

Minimum immersion length

Full immersion

Transition junction temperature range4

-200°C to 160°C

Sheath material

316 SST

Sheath length

50 mm ±5 mm(2 in ±0.2 in)

Lead-wire length

2.4 meters (8 ft)

Nominal resistance at 0.01°C

100 Ω ±0.1 Ω

Transition junction dimensions

No transition

Maximum immersion depth in liquid medium

Full immersion

Sensor location

3 mm ±1 mm from tip (1.2 in ±0.04 in)

Lead-wire temperature range

160°C

Calibration

1. Includes calibration and 100 hr drift (k = 2). 2. Three thermal cycles from min to max temp, includes hysteresis, 95% confidence (k = 2). 3. After 100 hours at max temp, 95% confidence (k = 2). 4. Temperatures outside this range will cause irreparable damage. 5. Per ASTM E 644.

Self heating (in 0°C bath)

±0.003°C

Drift3

±0.03°C at 0.01°C±0.04°C at 160°C

Maximum immersion depth in dry Medium

Full immersion