Fluke
P3840
1 / 1
- Part Number
- P3840
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Pressure Ranges
- P3830
- 500 to 30,000 psi, or 40 to 2,000 bar, or 4 to 200 MPa, or 40 to 2000 kgf/cm2
- P3860
- 500 to 60,000 psi or 40 to 4,000 bar or 4 to 400 MPa or 40 to 4000 kgf/cm2
- P3840
- 500 to 40,000 psi, or 40 to 2,600 bar, or 4 to 260 MPa, or 40 to 2600 kgf/cm2
Accuracy
- Accuracy1
- Standard accuracy is 0.02% of Reading1. Optional accuracy of 0.015% of Reading is vailable. Calibration certificate with traceability to NIST is provided with each instrument. An optional ISO/IEC 17025 accredited calibration certificate is available.
- Accuracy1
- 1. Accuracy is based on % of Reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10%, ± (accuracy class) x 10% of the piston range.
Materials of Construction
- Thermal coefficient of expansion
- 11 ppm/°C
- Cylinder material
- Tungsten carbide with cobalt binder
- Standard weight material
- Series 3 non-magnetic, austenitic, stainless steel
- Weight density
- 7.8 g/cm3
- Piston material
- Tungsten carbide with nickel binder
Options
- Conversion weight sets
- For applications that require nominal pressure increments in measurement units different than the main unit, conversion weight sets are available. Available measurement units are: psi, bar kgf/cm2 or MPa.
- Presscal software
- Windows based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Supports additional 12 pressure units (bar, mbar, MPa, kPa, psi, kg/cm2, atm, inH2O, mH2O, mmH2O, inHg, mmHg).
General
- Operating fluid
- Dioctyl Sebacate (DOS), our reference 55-600
- Intensifier ratio
- 7 to 1
- Seal materials
- Nitrile
- Reservoir volume
- 235 cc (14.3 in3)
- Instrument size
- 18 x 13.5 x 19 in (455 x 340 x 478 mm)
- Instrument weight
- 66 lbs. (30 Kg) Instrument Base only
- Test port adapters
- 9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP
Prodotti correlati
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro