Honeywell
VH5J7UPBH/M
High Performance Butterfly Valves, 3WAY HI PERF CL150 BFLY 4" 2-10VDC
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Additional Information
- Part Number
- VH5J7UPBH/M
Specifications
- Pipe Connection Type
- Flanged
- Number of Flange Bolts
- 8
- Manual Operation Type
- 7 mm hex crank, supplied
- Flange Type
- ASME/ANSI Class 150
- Flange Bolt Size
- 0.625 in
- Flange Bolt Pitch
- 11
- Valve Stem Material
- 17-4 PH Stainless
- Valve Body Material
- Carbon steel
- Valve Seat Material
- RTFE
- Valve Rangeability Ratio
- 100:1
- Valve Disc Material
- 316 stainless steel
- Regulatory Approvals
- CE ; cULus
- Minimum Operating Ambient Temperature
- -22 °F ; -30 °C
- Minimum Media Temperature
- -22 °F ; -30 °C
- Media Restrictions
- Not for use with fuels or modulating steam
- Maximum Operating Ambient Temperature
- 122 °F ; 50 °C
- Maximum Media Temperature
- 400 °F ; 204 °C
- Valve Flow Characteristic
- Modified Linear, Unidirectional
- Maximum Body Pressure Rating
- ASME/ANSI Class 150
- Leakage
- 0 %
- Includes
- MBP7U6BH/U fail-in-place actuator NEMA 4X IP66/67 with heater
- Controlled Media
- on/off steam control up to 50 psi ; Chilled or hot water- up to 60% glycol
- Maximum Differential Pressure
- 150 psi ; 1034 kPa
- Valve Start Position
- Normally Closed
- Actuator Control Signal
- Modulating
- Actuator Type
- Fail-in-place
- Pipe Connection Size
- 4 in ; 100 DN
- Valve Body Pattern
- 3-way (Mixing)
- Flow Coefficient
- 248 CV ; 215 Kvs
Documenti
Data Sheet
ScaricareProdotti correlati
Altre categorie
AttuatoriBlocchiCavi, tubi e tubi flessibiliCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro