Hubbell Wiring Device-Kellems
HBL360C7W
Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Specifications
- Grommet/Glands
- Solid Neoprene
- Operating Temperatures
- Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
- Certifications
- UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.
- Contact Carrier
- High-Impact Thermoset
- Cord Accommodation
- Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
- Moisture Resistance
- Watertight per IEC 60309-1
- Retainer
- High-Impact Thermoset
- Temperature Rise
- Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
- Certification
- UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC
- Cord Grip Retention
- Per CSA C22.2 No. 182.1 / UL1682.
- Color
- red
- Product Type
- iec-devices
- Poles and Wires
- 2 Pole, 3 Wire
- Service Style
- Standard
- Clamp Nut
- Nickel Plated Brass
- Replacement Interior Number
- IN360BF
- Cover Arm
- Rynite SST35
- Cover
- Rynite SST35
- Amperage
- 60A
- Weight in LBs
- 2.9
- Gaskets
- Solid Neoprene
- Cord Clamp Screws
- Stainless Steel (300 Series)
- Device
- Connector
- Product Identification
- Identification and ratings are a permanent part of the device housing.
- Voltage
- 480V
- Flammability
- HB or Better per UL 94 or CSA C22.2 No. 0.17
- Terminal Accommodations
- #8 To #2 AWG copper wire only
- IEC Product Type
- Watertight
- Ground/Phase Sleeve
- Brass
- Terminal Identification
- Terminals identified in accordance with North American and IEC conventions.
- Cover Screw/Rivet
- Nickel Plated Brass
- Pin/Sleeve Spring
- Beryllium Copper multi-contact insert with silver plating.
- Ingress Protection
- IP 67 Suitability
- Current Interrupting
- Certified for current interrupting at full rated current.
- Housing
- Zytel 801 Nylon
- Impact Resistance
- Per CSA C22.2 No. 182.1 / UL1682.
- Cord clamp range
- .500" To 1.450"
- Cord Clamps
- Rynite SST35
- Arm Spring
- Stainless Steel (17-1 Type)
- Assembly Screws
- Stainless Steel (300 series)
- Max Working Voltage
- 600V RMS (i.e.minimum creepage distance 10 mm minimum)
- Dielectric Withstand Voltage
- Withstands 3,000V AC Min.
- Rotating Sealing Disc
- Polycarbonate
- Endurance
- 5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
- Terminal Screws
- Stainless Steel (300 series)
Altre categorie
AttuatoriBlocchiCavi, tubi e tubi flessibiliCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro