Littelfuse
FS126-60
1 / 1
Descrizione
Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.- Part Number
- FS126-60
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Specifications
- Input Voltage (V)
- 120VAC
- Input Tolerance (%)
- ±15%
- Input AC Line Frequency (Hz)
- 50/60Hz
- Humidity
- 95% relative non-condensing
- Output Load Type
- Resistive or incandescent
- Output Load Rating (VA)
- Fullwave AC: 1A steady state
- Flash Rate (fpm)
- 60FPM ±20%
- On/Off Ratio (%)
- ≅50%
- Circuitry
- Encapsulated
- Inush
- 10A
- Operating Temperature
- -20° to 60° C (-4° F to 140° F)
- Storage Temperature (F/C)
- -40° to 85°C (-40°F to 185°F)
- Mounting Method
- Removable mounting bracket use on #8 (M4 x 0.7) screw
- Termination Type
- 18AWG (0.822) wires 6in. (15.2cm)18AWG (0.82 mm2) wires 6in. (15.2cm)
- Dimensions
- 1.50 x 0.94 in. (38.1 x 23.9mm)
- Weight (lbs/g)
- ≌1.1oz (31g)
- Sample capable
- No
Documenti
Data Sheet
ScaricareAltre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro