Littelfuse
MSM210P3
1 / 1
Descrizione
Operation (Delay-on-Make) The time delay begins upon application of input voltage. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.- Part Number
- MSM210P3
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Specifications
- Input Voltage (V)
- 24VAC
- Input Tolerance (%)
- ±10%
- Input AC Line Frequency (Hz)
- 50/60Hz
- Output Type
- Solid state
- Output Form
- NO open during timing
- Output Load Rating (VA)
- 0.5A steady state at 25°C; 0.25A stead state at 60°C
- Output Voltage Drop (V)
- ≅2.5V @ 0.5A
- Minimum Output Holding Current (mA)
- 40mA
- Time Delay Type
- Analog circuitry
- Time Delay Range
- 10s fixed
- Time Delay Tolerance (%)
- ±15%
- Recycle Time (ms)
- ≤75ms
- Repeat Accuracy (%)
- ±5%
- Setpoint vs Ambient Temperature and Operating Voltage (%)
- ≤ ±15%
- Insulation Resistance
- ≥100 MΩ
- Dielectric Breakdown
- ≥2000V RMS terminals to mounting surface
- Circuitry
- Encapsulated
- Mounting Method
- PC mount 14AWG (2.087mm2) wires (can be inserted in AMP miniature spring socket #645980-1); 3 inch wire length
- Operating Temperature
- -20° to 60°C (-4°F to 140°F)
- Storage Temperature (F/C)
- -30° to 85°C (-22°F to 185°F)
- Humidity
- 95% relative non-condensing
- Weight (lbs/g)
- ≅1.1oz (31.2g)
- Sample capable
- No
Documenti
Data Sheet
ScaricareProdotti correlati
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro