Littelfuse

SC3120A

1 / 1
thumbnail

Descrizione

Operation Sequential 3 or 4 circuit flashing of incandescent loads with equal time delays for each load. Upon application of input voltage, Load 1 is energized. At the end of the time delay, Load 1 de-energizes and Load 2 energizes. At the end of the time delay, Load 2 de-energizes and Load 3 energizes. This cycle continues until input voltage is removed. The set time delay (rate) is the timing for the whole cycle, for all 3 or 4 loads (output contacts). Reset: Removing input voltage resets the unit and cycle.
Part Number
SC3120A
  • Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
  • Sconti sulla rivendita fino al 40%!
Registrati
Invia una richiesta di prezzo
1
Metodi di pagamento:
Richiedete un preventivo e vi invieremo informazioni su disponibilità e prezzi.

Specifications

Input Voltage (V)
120VAC
Input Tolerance (%)
±15%
Input AC Line Frequency (Hz)
50/60Hz
Humidity
95% relative non-condensing
Output Type
Solid state
Output Load Rating (VA)
1A steady state per output
On/Off Ratio (%)
30 operations per minute fixed
Circuitry
Encapsulated
Insulation Resistance
≥100 MΩ
Dielectric Breakdown
≥2000V RMS terminals to mounting surface
Operating Temperature
-20° to 60° C (-4° F to 140° F)
Storage Temperature (F/C)
-40° to 85°C (-40°F to 185°F)
Mounting Method
Surface mount with two #6 (M3.5 x 0.6) screws
Termination Type
0.25 in. (6.35mm) male quick connect terminals
Dimensions
3.50 x 2.50 x 1.22 in. (88.9 x 63.5 x 31.0mm)
Weight (lbs/g)
≌5.4oz (153g)
Sample capable
No

Documenti

Data Sheet

Scaricare