Lutron
MS-OPS6M2-DV-IV
Maestro Dual Voltage Motion Sensor 6A IV
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Specifications
- NETXASC
- Combines a Maestro switch with a passive infrared occupancy sensor. Detects the heat from occupants moving within an area to determine whether the space is occupied. Based on the feedback from the sensor, the occupancy sensing switch will adjust the load accordingly. Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection. 180 degree sensor field-of-view. Up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage. Can be set to auto-on/auto-off or manual-on/auto-off. Adjustable timeout (1, 5, 15, or 30 minutes) and high/low sensitivity adjustment. Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan. Ground wire required.
- NETXCAT
- Lutron Maestro Dual Voltage Motion Sensor switch, 6-Amp, Single-Pole, Ivory
- NETXPOL
- Lutron Online Policy - PUBLIC
- NETXMKG
- Coordinating Claro Wall Plate and accessories sold separately. Lutron's Maestro Occupancy Sensing Switch gives you one less thing to worry about, turning the lights on and off when you enter and leave the room. It's a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Occupancy Sensing Switch and lights turn on when you enter the room, and then turn off automatically after you leave. The switch works just like a Lutron Maestro switch, allowing you to easily tap the switch to turn the lights on and then tap again to turn the lights off. Equipped with ambient light detection, you can customize your occupancy sensing switch to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids' rooms and never worry about lights being left on by mistake. Maestro Occupancy Sensing switches work with incandescent, halogen, magnetic and electronic low-voltage, non-dim LED, and non-dim fluorescent bulbs, as well as general purpose fans. This occupancy sensing switch can also be easily programmed to function as a vacancy (manual-on) sensor.
- NETXMB1
- Coordinating claro wall plate and accessories sold separately
- NETXMB2
- Multi-location, single pole/3-way
- NETXMB3
- Up to 6-Amps for lighting (120 Volts/277 Volts) and 3-Amps for fans
- NETXMB4
- Works with incandescent, halogen, magnetic and electronic low-voltage and non-dim LED and non-dim fluorescent bulbs, as well as general purpose fans
- NETXMB5
- Automatically turn lights on and off based on room occupancy
- NETXMB6
- Requires ground wire
- NETXMB7
- Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30 ft.
- NETXMB8
- Senses daylight, so lights don't turn on inadvertently (optional)
- NETXMB9
- Can be switched to vacancy mode (manual-on, auto off)
- Class Code
- ED-LSR
- Application
- Lighting Control
- Body
- Plastic
- Enclosure
- Plastic
- Environmental Conditions
- 0 to 90% humidity, non-condensing. Indoor use only.
- Load
- 6 A@120 to 277 VAC lights/3 A@120 VAC fan/3 A@120 VAC light and fan
- Mounting
- Wallbox
- Operating Temperature
- 32 to 104 F | 0 to 40 C
- Sensing Range
- 900 ft2 (82 m2) major motion coverage/400 ft2 (36 m2) minor motion coverage
- Sensor
- Passive infrared motion detection with dependable Lutron XCT technology
- Supply Voltage
- 120 to 277 VAC
- Type
- Occupancy sensor switch, multi-location/3-way/single-pole, dual-voltage
Documenti
Data Sheet
ScaricareAltre categorie
AttuatoriBlocchiCavi, tubi e tubi flessibiliCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro