1048292

Additional Information

Part Number

1048292

UPC

4055626650821

Tariff Code

85444290

Country of Origin

DE

ETIM

Group Code : EG000014

Group Description : Industrial socket/plug applications

Class Description : Charging connector E-Mobility

Class Code : EC002898

Version : 7

Product definition

Type

Rear protective cover screw connection

Type

Additional splash protection at the rear with single wire seals

Application

For charging electric vehicles (EV) with alternating current (AC)

Application

Compatible with infrastructure charging plugs

Affixed logo

PHOENIX CONTACT' logo

Design

Generation 1

Standards/regulations

IEC 62196-2

Charging standard

Type 2

Charging mode

Mode 3, Case B

Note on the connection method

Crimp connection, cannot be disconnected

Dimensions

Height

96 mm

Width

75 mm

Depth

76.2 mm

Bore dimensions

60 mm x 60 mm

Conductor length

0.5 m (AC cables)

Conductor length

0.5 m (Locking actuator cables)

Cable structure

5x 6.0 mm² + 2x 0.5 mm²

Type of conductor

Single wires

Electrical properties

Maximum charging power

22 kW

Type of charging current

AC 3-phase

Number of phases

3

Number of power contacts

5 (L1, L2, L3, N, PE)

Rated current of power contacts

32 A

Rated voltage for power contacts

480 V AC

Number of signal contacts

2 (CP, PP)

Rated current for signal contacts

2 A

Rated voltage for signal contacts

30 V AC

Type of signal transmission

Pulse width modulation

Note on the connection method

Crimp connection, cannot be disconnected

Material

Material

Plastic

Material surface of contacts

Ag

Mechanical properties

Insertion/withdrawal cycles

> 10000

Insertion force

< 100 N

Withdrawal force

< 100 N

Ambient conditions

Ambient temperature (operation)

-30 °C - 50 °C

Ambient temperature (storage/transport)

-40 °C - 80 °C

Max. altitude

5000 m (above sea level)

Degree of protection

IP44 (plugged in)

Degree of protection

IP54 (with protective cover, see accessories)

Degree of protection

IP44 (On the rear)

Locking

Locking type

Locking in the inserted state with a locking mechanism

Locking actuator

Number of positions of theconnectors

4

Operating voltage

12 V (Typical power supply at the motor)

Possible power supply range at the motor

9 V - 16 V

Maximum voltage for locking detection

30 V

Typical motor current for locking

0.2 A

Reverse current of the motor

max. 1 A

Max. dwell time with reverse current

1000 ms

Recommended adaptation time

600 ms

Pause time after entry or exit path

3 s

Service life insertion cycles

> 10000 load cycles

Ambient temperature (operation)

-30 °C - 50 °C

Cable length

0.5 m

Cable structure

4 x 0.5 mm²

Lock recognition

available

Mechanical emergency release

available

Environmental Product Compliance

REACh SVHC

Lead 7439-92-1

China RoHS

Environmentally Friendly Use Period = 10;

China RoHS

For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Design

Design line

Generation 1

Housing color

black

Customer variations

On request

Mounting

Possible mounting positions

Rear panel mounting

Possible mounting positions

Front mounting only possible when the locking actuator is removed (see EV-T2M3SE...E00 versions)

Restrictions to mounting position

Only 0 to 90 degree frontal inclination possible, see figure

Mounting position of the locking actuator

Top center

Screw connection of a protective cover

Only rear mounting possible

Max. wall thickness

max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)

Max. wall thickness

max. 28 mm (Rear mounting, normative maximum specification for infrastructure plug when using protective cover 1405217)

Max. wall thickness

max. 10 mm (Front mounting, when using the locking mechanism)

Mounting hole diameter

7.00 mm (ø)