Phoenix Contact
2953935
1 / 1
Descrizione
Relay module, with soldered-in remanence miniature switching relay, with negative switching diode wiring, contacts (AgSnO): small to large loads, 1 PDT, 48 V DC input voltage- Country of Origin
- DE
- Part Number
- 2953935
- Tariff Code
- 85364190
- EAN
- 4017918084677
- UPC
- 4017918084677
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Connection data input side
- Connection name
- Coil side
- Connection method
- Screw connection
- Stripping length
- 8 mm
- Screw thread
- M3
- Conductor cross section solid
- 0.2 mm² - 4 mm²
- Conductor cross section flexible
- 0.2 mm² - 2.5 mm²
- Conductor cross section AWG
- 24 - 12
Connection data output side
- Connection name
- Contact side
- Connection method
- Screw connection
- Stripping length
- 8 mm
- Screw thread
- M3
- Conductor cross section solid
- 0.2 mm² - 4 mm²
- Conductor cross section flexible
- 0.2 mm² - 2.5 mm²
- Conductor cross section AWG
- 24 - 12
Note
- Utilization restriction
- EMC: class A product, see manufacturer's declaration in the download area
Dimensions
- Width
- 17.5 mm
- Height
- 75 mm
- Depth
- 62.5 mm
Contact side (with destroyed gold layer)
- Maximum switching voltage
- 250 V AC/DC
- Limiting continuous current
- 5 A
- Maximum inrush current
- 6 A
- Interrupting rating (ohmic load) max.
- 120 W (at 24 V DC)
- Interrupting rating (ohmic load) max.
- 40 W (at 48 V DC)
- Interrupting rating (ohmic load) max.
- 35 W (at 60 V DC)
- Interrupting rating (ohmic load) max.
- 30 W (at 110 V DC)
- Interrupting rating (ohmic load) max.
- 55 W (at 220 V DC)
- Interrupting rating (ohmic load) max.
- 1250 VA (for 250 V AC)
Contact side
- Contact type
- Single contact, 1-PDT
- Type of switch contact
- Single contact
- Contact material
- AgSnO
- Maximum switching voltage
- 250 V AC/DC
- Minimum switching voltage
- 5 V (at 100 mA)
- Minimum switching voltage
- 24 V (At 1 mA)
- Min. switching current
- 1 mA (at 24 V)
- Min. switching current
- 100 mA (At 5 V)
- Maximum inrush current
- 8 A
- Limiting continuous current
- 6 A
- Interrupting rating (ohmic load) max.
- 144 W (at 24 V DC)
- Interrupting rating (ohmic load) max.
- 43 W (at 48 V DC)
- Interrupting rating (ohmic load) max.
- 42 W (at 60 V DC)
- Interrupting rating (ohmic load) max.
- 55 W (at 110 V DC)
- Interrupting rating (ohmic load) max.
- 100 W (at 220 V DC)
- Interrupting rating (ohmic load) max.
- 1500 VA (for 250 V AC)
Ambient conditions
- Ambient temperature (operation)
- -40 °C - 50 °C
- Ambient temperature (storage/transport)
- -40 °C - 70 °C
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 50
- China RoHS
- For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Coil side
- Nominal input voltage U<sub>N</sub>
- 48 V DC
- Input voltage range in reference to U<sub>N</sub>
- 0.8 - 1.1
- Typical input current at U<sub>N</sub>
- typ. 8.5 mA
- Typical response time
- 5 ms
- Typical release time
- 5 ms
- Coil voltage
- 24 V DC
- Protective circuit
- Free-wheeling diode Damping diode
- Protective circuit
- Reverse polarity protection Polarity protection diode
- Pulse time range
- 30 ms - 5 s
- Power dissipation for nominal condition
- 0.41 W
Standards and Regulations
- Degree of pollution
- 2
- Overvoltage category
- III
- Designation
- Air clearances and creepage distances between the power circuits
- Standards/regulations
- DIN EN 50178
- Insulation
- Safe isolation, reinforced insulation
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro