Schneider Electric
861SSRA208-DC-2
1 / 5
Descrizione
The SE Relays 861H series, patented solid-state, UL certified for Class I Division 2 Hazardous Locations per ISA 12.12, relay offers an energy-efficient TRIAC AC random current switching device with input voltage range as 3VDC to 32VDC. SPST-NO contacts with rated current 8A and output voltage 3VAC to 50VAC . Solid-state circuitry involves no moving parts and is alternative to standard electromechanical relays. Advantages include longer life cycles, less energy consumption, and reduced maintenance costs. Optically coupled circuit provides isolation between input and output circuits. Internal snubber helps protect the relay’s internal circuit from high voltage transients. Finger protected (IP 20) terminals help prevent an operator from touching live circuits. Mounts directly onto a DIN rail or panel, and provides flexibility to accommodate last-minute design changes.- Country of Origin
- IN
- Part Number
- 861SSRA208-DC-2
- EAN
- 39122333
- UNSPSC
- 39122333
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Specifications
- [Uc] Control Circuit Voltage
- 3...32 V DC
- Range Of Product
- Legacy
- Mounting Support
- panel || DIN rail
- Maximum Output Current
- 8 A AC
- Output Voltage
- 24...280 V AC
- Product Or Component Type
- solid state relay
- Phase
- 1 phase
Complementary
- Contacts Type And Composition
- NO
- Height
- 65 mm
- Tightening Torque
- 0.8 N.m for input/output
- Holding Current
- 150 mA
- Dv/Dt
- 250 V/µs off-state at maximum rated voltage
- Local Signalling
- for input status 1 LED (green)
- Solid State Output Type
- triac output
- Maximum I²T For Fusing
- 250 A².s 8.3 ms
- Thermal Resitance
- 2 °C/W
- Maximum Voltage Drop
- <1.6 V peak AC
- Switch Function
- SPST
- Surge Current
- 200 A 1 cycle
- Width
- 15.75 mm
- Protection Type
- reverse polarity protection
- Input Current Limits
- 30-30 mA at 32 V DC typical
- Protection Technology
- current limiter
- Response Time
- 8.33 ms (turn-off) || 8.33 ms (turn-on)
- Load Current
- 8 A at nominal load || 5 A incandescent lamp || 3 A motor
- Depth
- 89.83 mm
- Connections - Terminals
- input/output screw clamp terminal 2.5-2.5 mm² AWG 14)
- Overload Current
- 24 A for 1 second
- Net Weight
- 127.1 g
- Maximum Leakage Current
- 6 mA at off-state 240 V AC
- Dielectric Strength
- 2500 V between input and output || 2500 V between terminals and chassis
- Drop-Out Voltage
- 1 V
- Device Presentation
- complete device
Offer Sustainability
- China Rohs Regulation
- X
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environment
- Product Certifications
- CE || CSA || UL
- Ambient Air Temperature For Operation
- -30-80 °C
- Ambient Air Temperature For Storage
- -40-100 °C
- Ip Degree Of Protection
- IP20
Documenti
Data Sheet
ScaricareProdotti correlati
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro