Schneider Electric
9013GSG2J16
1 / 1
Descrizione
Attivo maturo
This product is part of the NEMA Pressure Switches range, an offer of pump or compressor switches. This pump or compressor switch has 2 normally closed, snap action, DPST-DB (double pole single throw, double break) form YY contacts and pressure setting value of 8psi to 20psi. The pressure switch with a pressure sensor size of 80psi (5psi to 60psi), an adjustable range on rising pressure of 20psi to 80psi and approximate adjustable differential of 15psi to 30psi. It is furnished with screw clamp terminals for electrical connection and 0.25inch NPSF internal for fluid connection. This switch has a diaphragm actuator which can be operated from any position and adjustable differential scale for internal settings. The enclosure is made of polypropylene. It is available in size of 3.44inch (W) x 3.88inch (D) x 5.4inch (H) and weighs 2.25lb. It is suitable for pressure controlling or monitoring of water pumps, compressors, agricultural/irrigation water systems, molding presses, injection molders, grinding machines, machining centers, complex and special machines. It is an IP20 and NEMA 1 rated product. This product is certified by CE, CSA and UL. Meets UL 508 and NSF ANSI 372 standards. Every pressure switch has two operating points, one on rising pressure and one of falling pressure. The operating point on rising pressure is referred to as the TRIP POINT or cut out for pumps and compressors. Power pressure switch rated for the direct control of motors in pump and compressor applications. Rugged, robust construction provides a long life and years of uninterrupted, worry-free service. Electromechanical switch to monitor and control pressure conditions for industrial and end-user applications. Every pressure switch has two operating points, one on rising pressure and one of falling pressure. The operating point on rising pressure is referred to as the TRIP POINT or cut out for pumps and compressors. Power pressure switch rated for the direct control of motors in pump and compressor applications. Rugged, robust construction provides a long life and years of uninterrupted, worry-free service. Electromechanical switch to monitor and control pressure conditions for industrial and end-users applications.- Country of Origin
- MX
- Part Number
- 9013GSG2J16
- Tariff Code
- 9032200000
- EAN
- 39122210
- UPC
- 785901165606
- UNSPSC
- 39122210
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Specifications
- Range Of Product
- Square D Pumptrol
- Type Of Packing
- individual
- Pressure Sensor Name
- 9013GS
- Value Of Setting
- 8...20 psi
- Product Specific Application
- control electrically driven water pumps and air compressors
- Quantity Per Set
- 1
- Electrical Circuit Type
- power circuit
- Pressure Sensor Size
- 80 psi 5-60 psi)
Contractual warranty
- Warranty
- 18 months
Complementary
- Pressure Sensor Type
- electromechanical pressure switch
- Pressure Actuator
- diaphragm
- Materials In Contact With Fluid
- zinc plated steel or equivalent flange || nitrile (Buna-N) or equivalent rubber diaphragm
- Height
- 5.4 in
- Approximate Adjustable Differential
- 15-30 psi
- Terminal Block Type
- 4 terminals
- Terminals Description Iso N°1
- L2-T2 || L1-T1
- Short-Circuit Protection
- 20 A cartridge fuse gG
- Repeat Accuracy
- +/- 3 %
- Pressure Switch Type Of Operation
- regulation between 2 thresholds
- Maximum Operating Rate
- 10 cyc/mn
- Contacts Type And Composition
- 2 NC, snap action, DPST-DB, Form YY
- Adjustable Range On Rising Pressure
- 20-80 psi
- Local Display
- without
- Net Weight
- 2.25 lb(US)
- Electrical Durability
- 100000 cycles 10 cyc/mn
- Fluid Connection Type
- 0.25 inch NPSF internal UL 508
- Cable Entry Number
- 3 knock-outs for 1/2" conduit UL 508
- Electrical Connection
- screw-clamp terminals 10 AWG || screw-clamp terminals 5.261 mm²
- [Ui] Rated Insulation Voltage
- 575 V UL 508
- Controlled Fluid
- air -22-257 °F) || fresh water -22-257 °F)
- Setting
- internal
- Scale Type
- adjustable differential
- Mechanical Durability
- 300000 cycles
- Material
- polypropylene Cover || noryl thermoplastic resin or equivalent Cover
- Operating Position
- any position
- Width
- 3.44 in
- Depth
- 3.88 in
- Motor Power Kw
- 1.5 kW 2 hp)115 V AC, 1 phase || 2.2 kW 3 hp)115 V AC, 3 phase || 2.2 kW 3 hp)230 V AC, 1 phase || 0.75 kW 1 hp)115 V DC || 0.75 kW 1 hp)230 V DC || 3.75 kW 5 hp)230 V AC, 3 phase || 3.7 kW 5 hp)460 V AC, 1 phase || 3.7 kW 5 hp)460 V AC, 3 phase || 3.7 kW 5 hp)575 V AC, 1 phase || 3.7 kW 5 hp)575 V AC, 3 phase
- Destruction Pressure
- 300 psi
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP111211EN
- Sustainable Offer Status
- Green Premium product
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Circularity Profile
- ENVEOLI111210EN
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Environment
- Product Certifications
- UL listed file E12158 || CSA file LR25490
- Ambient Air Temperature For Operation
- -33-257 °F
- Standards
- NSF ANSI 372 || UL 508 || CE
- Ip Degree Of Protection
- IP20 conforming to IEC 60529
- Ambient Air Temperature For Storage
- -33-257 °F
- Nema Degree Of Protection
- NEMA 1 UL 50
- Protective Treatment
- none
