- Electrical Connection
- 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit || screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit || screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit || screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit || 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit || screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit || 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit || 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit || screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
- Network Frequency
- 47.5...63 Hz
- [Uc] Control Circuit Voltage
- built into the starter
- Height
- 154 mm
- Deceleration Time Symb
- adjustable from 1 to 10 s
- Discrete Input Voltage
- 24...40 V
- Maximum Switching Current
- relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive || relay outputs 2 A 30 kV DC cos phi = 0.5 20 ms inductive
- Discrete Output Voltage
- 24 V 6...30 V) open collector logic
- Marking
- CE
- Power Range
- 7-11 kW 380-440 V 3 phase
- Net Weight
- 0.56 kg
- Discrete Output Current
- 2 A DC-13 || 3 A AC-15
- Motor Starter Type
- soft starter
- Function Available
- integrated bypass
- Supply Voltage Limits
- 342-456 V
- Starting Time
- 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
- Minimum Switching Current
- 10 mA 6 V DC relay outputs
- Discrete Input Type
- logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
- Assembly Style
- with heat sink
- Compatibility Code
- ATS01N2
- Output Voltage
- <= power supply voltage
- Operating Position
- vertical +/- 10 degree
- Display Type
- 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
- Width
- 45 mm
- Depth
- 131 mm
- Discrete Input Logic
- positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
- Starting Torque
- 30...80 % of starting torque of motor connected directly on the line supply
- Tightening Torque
- 0.5-0.5 N.m || 1.9-2.5 N.m
- Supply Frequency
- 50...60 Hz - 5...5 %
- Discrete Output Type
- open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
