Schneider Electric
BMI0702T16A
servo motor BMI 1-phase - keyed IP54 single turn - 32768 p/t
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
€1,550.00
1
Metodi di pagamento:
Un totale di 1 Part In-Stock da 13 Distributors
Condizioni del prodotto:
Offerta con tempi di consegna del produttore
Spedizione in:Su richiesta
Miglior prezzo:
€577.79
Additional Information
- Part Number
- BMI0702T16A
- UNSPSC
- 26101205
- Tariff Code
- 8501206000
- Country of Origin
- DE
Environment
- Ip Degree Of Protection
- shaft IP54 || housing IP65
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP1312017EN
- Sustainable Offer Status
- Green Premium product
- Pvc Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Circularity Profile
- ENVEOLI1312017EN
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Maximum Mechanical Speed
- 8000 rpm
- Output Current 3S Peak
- 10.5 A 230 V 1 s
- Stator Electrical Time Constant
- 2.89 ms 20 °C
- Circle Diameter Of The Mounting Holes
- 75-82 mm
- Maximum Radial Force Fr
- 710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
- Mounting Support
- international standard flange
- Number Of Motor Stacks
- 2
- Rotor Inertia
- 1.13 kg.cm²
- Number Of Motor Poles
- 10
- Back Emf Constant
- 42.1 V/krpm 20 °C
- Maximum Axial Force Fa
- 0.2 x Fr
- Centring Collar Depth
- 2.5 mm
- Holding Brake
- without
- Speed Feedback Resolution
- 32768 points/turn
- Second Shaft
- without second shaft end
- Product Compatibility
- drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
- Network Frequency Limits
- 47.5-63 Hz
- Shaft Length
- 23 mm
- Phase
- single phase
- Maximum Current Irms
- 17.7 A 230 V, single phase || 17.7 A 115 V, single phase
- Length
- 268 mm
- Centring Collar Diameter
- 60 mm
- Stator Inductance
- 7.8 mH 20 °C
- Motor Flange Size
- 70 mm
- Peak Stall Torque
- 6.6 N.m 115 V single phase || 6.6 N.m 230 V single phase
- Number Of Mounting Holes
- 4
- Distance Shaft Shoulder-Flange
- 2.5 mm
- Shaft Diameter
- 11 mm
- Key Width
- 4 mm
- Nominal Output Power
- 700 W 230 V single phase || 400 W 115 V single phase
- [Us] Rated Supply Voltage
- 115...230 V - 15...10 %
- Supply Voltage Limits
- 100-240 V
- Mounting Holes Diameter
- 5.5 mm
- Type Of Cooling
- natural convection
- Shaft End
- keyed
- Nominal Speed
- 4000 rpm 230 V single phase || 1700 rpm 115 V single phase
- Electrical Connection
- printed circuit board connector
- Feedback Type
- absolute single turn SinCos Hiperface
- Stator Resistance
- 2.7 Ohm 20 °C
- Emc Filter
- integrated
- Continuous Stall Current
- 2.6 A
- Nominal Torque
- 2.2 N.m 115 V single phase || 1.7 N.m 230 V single phase
- Continuous Output Current
- 2.6 A 8 kHz
- Torque Constant
- 0.63 N.m/A 20 °C
- Supply Frequency
- 50/60 Hz - 5...5 %
- Continuous Stall Torque
- 2.48 N.m 115...230 V single phase
Specifications
- Product Or Component Type
- servo motor with power stage
- Range Compatibility
- Lexium 32i
- Device Short Name
- BMI
Documenti
Data Sheet
ScaricareModelli CAD
traceparts
ScaricareAltre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro