DPE12G7

Additional Information

Part Number

DPE12G7

UNSPSC

39121529

Tariff Code

8536410045

Country of Origin

ID

Environment

Product Certifications

UL || CSA

Ambient Air Temperature For Operation

-40-60 °C

Standards

CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 60947-4-1

Pollution Degree

3

[Uimp] Rated Impulse Withstand Voltage

6 kV IEC 60947

Ambient Air Temperature For Storage

-60-80 °C

Ip Degree Of Protection

IP22 front face IEC 60529

Mechanical Robustness

vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor open 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms)

Operating Altitude

0...6561.68 ft (0...2000 m)

Fire Resistance

850 °C IEC 60695-2-1

Overvoltage Category

III

[Ui] Rated Insulation Voltage

power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || signalling circuit 690 V IEC 60947-1

Complementary

Non-Overlap Time

1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact

Minimum Switching Current

5 mA for signalling circuit

[Ue] Rated Operational Voltage

power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC

Height

77 mm

Power Dissipation Per Pole

1.56 W AC-1 || 0.2 W AC-3

Average Impedance

2.5 mOhm - Ith 25 A 50 Hz for power circuit

Control Circuit Voltage Limits

drop-out: 0.3...0.6 Uc at 50/60 Hz (at <70 °C) || operational: 0.8...1.1 Uc at 50 Hz (at <60 °C) || operational: 0.85...1.1 Uc at 60 Hz (at <60 °C) || operational: 1...1.1 Uc at 50/60 Hz (at <70 °C)

[Ith] Conventional Free Air Thermal Current

10 A (at 60 °C) for signalling circuit || 25 A (at 60 °C) for power circuit

Mounting Support

rail || plate

Control Circuit Type

AC 50/60 Hz

Safety Reliability Level

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Insulation Resistance

> 10 MOhm for signalling circuit

Rated Breaking Capacity

250 A at 440 V for power circuit conforming to IEC 60947

Irms Rated Making Capacity

250 A at 440 V for power circuit conforming to IEC 60947 || 140 A AC for signalling circuit conforming to IEC 60947-5-1 || 250 A DC for signalling circuit conforming to IEC 60947-5-1

Associated Fuse Rating

10 A gG for signalling circuit conforming to IEC 60947-5-1 || 25 A gG at <= 690 V coordination type 1 for power circuit || 20 A gG at <= 690 V coordination type 2 for power circuit

Net Weight

0.32 kg

Inrush Power In Va

70-70 VA 60 Hz cos phi 0.75 (at 20 °C) || 70-70 VA 50 Hz cos phi 0.75 (at 20 °C)

Connections - Terminals

power circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible with cable end || power circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || power circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: solid without cable end || power circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: solid without cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: solid without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: solid without cable end

Coil Technology

without built-in suppressor module

Minimum Switching Voltage

17 V for signalling circuit

Maximum Operating Rate

3600 cyc/h 60 °C

Signalling Circuit Frequency

25...400 Hz

Tightening Torque

power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2

Electrical Durability

0.6 Mcycles 25 A AC-1 <= 440 V || 1 Mcycles 12 A AC-3 <= 440 V

Mechanical Durability

10 Mcycles

Auxiliary Contacts Type

mechanically linked 1 NO IEC 60947-5-1

Hold-In Power Consumption In Va

7.5-7.5 VA 60 Hz cos phi 0.3 (at 20 °C) || 7-7 VA 50 Hz cos phi 0.3 (at 20 °C)

Operating Time

12...22 ms closing || 4...19 ms opening

Width

45 mm

Depth

86 mm

Heat Dissipation

2-3 W 50/60 Hz

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1501004

Sustainable Offer Status

Green Premium product

Toxic Heavy Metal Free

Yes

Reach Regulation

Free of Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Reach Free Of Svhc

Yes

China Rohs Regulation

Pro-active China RoHS declaration (out of China RoHS legal scope)

Circularity Profile

ENVEOLI1501004

Eu Rohs Directive

Compliant

Specifications

[Uc] Control Circuit Voltage

120 V AC 50/60 Hz

Auxiliary Contact Composition

1 NO

Contactor Application

resistive load || motor control

Product Or Component Type

contactor

Product Name

Easy TeSys DPE

Range

Easy TeSys

Pole Contact Composition

3 NO

Utilisation Category

AC-4 || AC-1 || AC-3

[Ie] Rated Operational Current

12 A (at <60 °C) at <= 440 V AC AC-3 for power circuit || 25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit

Poles Description

3P

Maximum Horse Power Rating

0.33 hp at 115 V AC 50/60 Hz for 1 phase motors || 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors || 2 hp at 200/208 V AC 50/60 Hz for 3 phase motors || 2 hp at 230/240 V AC 50/60 Hz for 3 phase motors || 5 hp at 460/480 V AC 50/60 Hz for 3 phase motors || 7.5 hp at 575/600 V AC 50/60 Hz for 3 phase motors

Motor Power Kw

3 kW 220...230 V AC 50/60 Hz || 5.5 kW 380...400 V AC 50/60 Hz || 5.5 kW 415 V AC 50/60 Hz || 5.5 kW 440 V AC 50/60 Hz || 7.5 kW 500 V AC 50/60 Hz || 7.5 kW 660...690 V AC 50/60 Hz

Device Short Name

DPE

Documenti

Modelli CAD

Parti in traccia

Scaricare