plug-in relay, Harmony electromechanical relays, 15A, 2CO, with LED, lockable test button, 110V DC
RPM22FD
RPM22FD
RPM22FD
RPM22FD
  • Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
  • Sconti sulla rivendita fino al 40%!
Registrati
€7.99
1
Metodi di pagamento:

Additional Information

Part Number
RPM22FD
UNSPSC
39122326
Tariff Code
8536490075
Country of Origin
CN

Environment

Product Certifications
UL || EAC || CSA
Standards
CSA C22.2 No 14 || IEC 61810-1 || UL 508
Ambient Air Temperature For Operation
-40-55 °C
Dielectric Strength
1500 V AC between contacts with micro disconnection || 2000 V AC between coil and contact with reinforced || 2000 V AC between poles with basic
Vibration Resistance
3 gn +/- 1 mm 10-150 Hz)5 cycles in operation || 5 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Shock Resistance
15 gnin operation || 30 gnnot operating
Ip Degree Of Protection
IP40 conforming to IEC 60529
Ambient Air Temperature For Storage
-40-85 °C

Contractual warranty

Warranty
18 months

Offer Sustainability

Rohs Exemption Information
Yes
Environmental Disclosure
ENVPEP1406038EN
Sustainable Offer Status
Green Premium product
Reach Regulation
Free of Substances of Very High Concern above the threshold
California Proposition 65
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc
Yes
Weee
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation
X
Circularity Profile
N/A
Eu Rohs Directive
Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Maximum Switching Capacity
3750 VA || 420 W
Safety Reliability Data
B10d = 100000
Operating Rate
<= 1200 cycles/hour under load || <= 18000 cycles/hour no-load
Protection Category
RT I
Test Levels
level A group mounting
Electrical Durability
100000 cycles resistive
Contacts Material
AgNi
Shape Of Pin
flat
Reset Time
20 ms at nominal voltage
Net Weight
0.036 kg
Maximum Switching Voltage
250 V IEC
Average Resistance
13440 Ohm at 20 °C +/- 10 %
Device Presentation
complete product
Average Coil Consumption
0.85 W
Rated Operational Voltage Limits
88...121 V DC
Pollution Degree
3
[Ie] Rated Operational Current
15 A 277 V AC) UL || 15 A 28 V DC) UL || 15 A 250 V AC) NO IEC || 15 A 28 V DC) NO IEC || 7.5 A 250 V AC) NC IEC || 7.5 A 28 V DC) NC IEC
[Ui] Rated Insulation Voltage
250 V IEC || 300 V CSA || 300 V UL
Mechanical Durability
10000000 cycles
Operating Position
any position
Operating Time
20 ms at nominal voltage
Load Current
15 A 250 V AC || 15 A 28 V DC
Drop-Out Voltage Threshold
>= 0.1 Uc DC
[Uimp] Rated Impulse Withstand Voltage
4 kV 1.2/50 µs
Minimum Switching Capacity
170 mW 10 mA, 17 V

Specifications

Utilisation Coefficient
20 %
[Uc] Control Circuit Voltage
110 V DC
Range Of Product
Harmony Electromechanical Relays
Product Or Component Type
plug-in relay
Status Led
with
Control Type
lockable test button
Series Name
Power
Contacts Type And Composition
2 C/O
Device Short Name
RPM
[Ithe] Conventional Enclosed Thermal Current
15 A -40-55 °C

Documenti

Data Sheet

Scaricare

Modelli CAD

Parti in traccia
Parti in traccia
Scaricare

Prodotti correlati