- Circle Diameter Of The Mounting Holes
- 82 mm
- Peak Stall Torque
- 11.3 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Continuous Power
- 1330 W
- Shaft Diameter
- 14 mm
- Nominal Output Power
- 460 W 115 V single phase || 880 W 230 V single phase || 1450 W 400 V three phase || 1550 W 480 V three phase
- Maximum Mechanical Speed
- 8000 rpm
- Mounting Holes Diameter
- 5.5 mm
- Type Of Cooling
- natural convection
- Maximum Radial Force Fr
- 730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 0.58 kg.cm²
- Number Of Motor Poles
- 3
- Back Emf Constant
- 49 V/krpm 20 °C
- Maximum Axial Force Fa
- 80 N
- Ip Degree Of Protection
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5 || housing IP67 EN/IEC 60034-5
- Shaft End
- smooth shaft
- Centring Collar Depth
- 2.5 mm
- Nominal Speed
- 1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
- Electrical Connection
- straight connector
- Holding Brake
- without
- Speed Feedback Resolution
- 128 periods
- Stator Resistance
- 2.7 Ohm
- Continuous Stall Current
- 4.1 A
- Nominal Torque
- 2.95 N.m 115 V single phase || 2.8 N.m 230 V single phase || 2.1 N.m 400 V three phase || 2.1 N.m 480 V three phase
- Shaft Length
- 30 mm
- Phase
- three phase
- Length
- 220 mm
- Net Weight
- 3.6 kg
- Maximum Current Irms
- 17 A
- Torque Constant
- 0.72 N.m/A 120 °C
- Centring Collar Diameter
- 60 mm
- Continuous Stall Torque
- 2.94 N.m 115...480 V three phase
- Stator Inductance
- 20.3 mH
- Motor Flange Size
- 70 mm
- [Us] Rated Supply Voltage
- 115...480 V