- Circle Diameter Of The Mounting Holes
- 115 mm
- Peak Stall Torque
- 40.5 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Continuous Power
- 2500 W
- Shaft Diameter
- 24 mm
- Key Width
- 8 mm
- Nominal Output Power
- 780 W 115 V single phase || 1490 W 230 V single phase || 2480 W 400 V three phase || 2600 W 480 V three phase
- Maximum Mechanical Speed
- 6000 rpm
- Mounting Holes Diameter
- 9.0 mm
- Type Of Cooling
- natural convection
- Holding Torque
- 12 N.m
- Maximum Radial Force Fr
- 1070 N 1000 rpm || 850 N 2000 rpm || 740 N 3000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 5.245 kg.cm²
- Number Of Motor Poles
- 4
- Back Emf Constant
- 103 V/krpm 20 °C
- Maximum Axial Force Fa
- 160 N
- Ip Degree Of Protection
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End
- parallel key
- Centring Collar Depth
- 3.5 mm
- Nominal Speed
- 750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
- Electrical Connection
- straight connector
- Holding Brake
- with
- Speed Feedback Resolution
- 128 periods
- Stator Resistance
- 1.81 Ohm
- Continuous Stall Current
- 6.2 A
- Nominal Torque
- 9.9 N.m 115 V single phase || 9.5 N.m 230 V single phase || 7.9 N.m 400 V three phase || 6.9 N.m 480 V three phase
- Shaft Length
- 50 mm
- Phase
- three phase
- Length
- 307.5 mm
- Net Weight
- 9.9 kg
- Maximum Current Irms
- 32.3 A
- Torque Constant
- 1.62 N.m/A 120 °C
- Centring Collar Diameter
- 95 mm
- Continuous Stall Torque
- 10 N.m 115...480 V three phase
- Stator Inductance
- 18.35 mH
- Motor Flange Size
- 100 mm
- [Us] Rated Supply Voltage
- 115...480 V