Schneider Electric
SH31401M12A1100
servo motor SH3 140 11,1Nm,key,multi,nobrake,str.conn,IP65/IP65,4k RPM
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Additional Information
- Part Number
- SH31401M12A1100
- UNSPSC
- 39121021
Specifications
- Range Compatibility
- PacDrive 3
- Product Or Component Type
- servo motor
- Device Short Name
- SH3.....M
Contractual warranty
- Warranty
- 18 months
Complementary
- Circle Diameter Of The Mounting Holes
- 165 mm
- Peak Stall Torque
- 27 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Continuous Power
- 1700 W
- Shaft Diameter
- 24 mm
- Key Width
- 8 mm
- Nominal Output Power
- 430 W 115 V single phase || 860 W 230 V single phase || 1670 W 400 V three phase || 1960 W 480 V three phase
- Maximum Mechanical Speed
- 4000 rpm
- Mounting Holes Diameter
- 11 mm
- Type Of Cooling
- natural convection
- Maximum Radial Force Fr
- 1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 7.41 kg.cm²
- Number Of Motor Poles
- 5
- Back Emf Constant
- 193 V/krpm 20 °C
- Maximum Axial Force Fa
- 300 N
- Ip Degree Of Protection
- motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End
- parallel key
- Centring Collar Depth
- 3.5 mm
- Nominal Speed
- 375 rpm 115 V single phase || 750 rpm 230 V single phase || 1500 rpm 400 V three phase || 1800 rpm 480 V three phase
- Electrical Connection
- rotatable right angled connector
- Holding Brake
- without
- Speed Feedback Resolution
- 128 periods
- Stator Resistance
- 5.3 Ohm
- Continuous Stall Current
- 4 A
- Nominal Torque
- 11 N.m 115 V single phase || 10.95 N.m 230 V single phase || 10.6 N.m 400 V three phase || 10.4 N.m 480 V three phase
- Shaft Length
- 50 mm
- Phase
- three phase
- Length
- 217.5 mm
- Net Weight
- 11.9 kg
- Maximum Current Irms
- 10.8 A
- Torque Constant
- 2.78 N.m/A 120 °C
- Centring Collar Diameter
- 130 mm
- Continuous Stall Torque
- 11.1 N.m 115...480 V three phase
- Stator Inductance
- 88.55 mH
- Motor Flange Size
- 140 mm
- [Us] Rated Supply Voltage
- 115...480 V
Modelli CAD
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro