Schneider Electric
STBDAO8210K
standard digital output kit - Modicon STB - 115..230 V AC - 2 O
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
€133.09
1
Metodi di pagamento:
Un totale di 11 Parts In-Stock da 14 Distributors
Condizioni del prodotto:
Offerta con tempi di consegna del produttore
Spedizione in:Su richiesta
Miglior prezzo:
€63.41
Additional Information
- Part Number
- STBDAO8210K
- UNSPSC
- 32151705
- Tariff Code
- 8537109170
- Country of Origin
- ID
Environment
- Product Certifications
- UL || CSA || FM Class 1 Division 2
- Ambient Air Temperature For Storage
- -40...185 °F without derating
- Standards
- IEC 61131-2
- Ambient Air Temperature For Operation
- 0-60 °C without derating)
- Shock Resistance
- 30 gn 11 ms IEC 88 reference 2-27
- Vibration Resistance
- 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
- Ip Degree Of Protection
- IP20 conforming to IEC 61131-2 class 1
- Pollution Degree
- 2 IEC 60664-1
- Ambient Air Temperature For Storage
- -40-85 °C without derating
- Relative Humidity
- 95-95 % 60-60 °C without condensation
- Operating Altitude
- <= 6561.68 ft (2000 m)
- Ambient Air Temperature For Operation
- 32...140 °F without derating
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Insulation Between Channels And Logic Bus
- 1780 V for 1 minute
- Cold Swapping
- yes
- Height
- 18.4 mm
- Reset
- manual or automatic reset COM fault
- Absolute Maximum Voltage
- 300 V 10 s || 400 V 20 ms
- Discrete Output Logic
- positive or negative
- Status Led
- 1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (OUT1 to OUT2) || 1 LED (Red) module error (ERR)
- Output Voltage
- 20...265 V AC
- Hot Swapping Fallback
- yes for standard NIMs
- Supply
- power distribution module
- Response Time
- 10 ms off-to-on || 10.5 ms on-to-off
- Protection Type
- output surge protection varistance and RC circuit
- Surge Current
- 20 A 40 ms || 30 A 20 ms
- Current Consumption
- 45 mA 5 V DC logic bus
- Marking
- CE
- Net Weight
- 0.125 kg
- Discrete Output Current
- 1000 mA 60 °C || 2000 mA 30 °C
- Fallback Status
- state 0 basic NIMs || user configurable standard NIMs
- Minimum Load
- 5 mA
- Width
- 128.3 mm
- Overvoltage Category
- II
- Depth
- 70 mm
- Product Compatibility
- I/O base STBXBA2000 || power distribution module STBPDT2100/2105
- Maximum Leakage Current
- 2 mA at state 0 115 V || 2.5 mA at state 0 230 V
Specifications
- Discrete Output Type
- triac
- Range Of Product
- Modicon STB distributed I/O solution
- Discrete Output Voltage Type
- AC
- Product Or Component Type
- standard digital output kit
- Discrete Output Voltage
- 115...230 V
- Discrete Output Number
- 2
- Kit Composition
- STBXTS1100, 5-terminal screw type connector || STBDAO8210 module || STBXTS2110, 5-terminal spring clamp connector || STBXBA2000 base
Documenti
Data Sheet
ScaricareModelli CAD
traceparts
Scaricare