- Connections - Terminals
- 2 captive screw clamp terminals, removable terminal block || 1 captive screw clamp terminals, removable terminal block
- Number Of Terminal Blocks
- 6
- Height
- 99 mm
- Integrated Connection Type
- backplane expansion bus
- Cable Cross Section
- 0.2-1.5 mm² - AWG 24...AWG 16 flexible without cable end || 0.2-2.5 mm² - AWG 24...AWG 14 flexible without cable end || 0.25-1 mm² - AWG 23...AWG 18 flexible with cable end, without bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, with bezel || 0.25-2.5 mm² - AWG 23...AWG 14 flexible with cable end, without bezel || 0.5-1.5 mm² - AWG 20...AWG 16 flexible with cable end, with double bezel || 0.2-1 mm² - AWG 24...AWG 18 solid without cable end || 0.2-2.5 mm² - AWG 24...AWG 14 solid without cable end
- Load Type
- resistive load
- Discrete Input Voltage
- 24 V DC
- Power Consumption In W
- 3 W
- Local Signalling
- 1 LED green PWR power ON || 1 LED green RUN RUN (status) || 1 LED red E IN internal error || 1 LED red E EX external error || 2 LEDs orange ADDR node address || 4 LEDs green/red OUT output status || 4 LEDs yellow RST restart signal || 4 LEDs yellow STATUS output status
- Net Weight
- 0.25 kg
- Discrete Output Voltage
- 24 V DC
- Power Dissipation In W
- 3 W
- Quality Labels
- CE
- Mounting Support
- omega 35 mm DIN rail EN 50022
- Width
- 114.5 mm
- Discrete Output Current
- 400 mA || 100 mA
- Depth
- 22.5 mm
- Safety Level
- can reach category 4 ISO 13849-1 || can reach PL = e ISO 13849-1 || can reach SIL 3 IEC 61508 || SILCL 3 IEC 62061
- Output Load
- 60 Ohm