Siemens
6ES7214-1BD23-0XB0
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
$632.31
1
Metodi di pagamento:
Un totale di 293 Parts In-Stock da 41 Distributors
Condizioni del prodotto:
Additional Information
- Part Number
- 6ES7214-1BD23-0XB0
- UPC
- 662643188387
Specifications
- Net Weight in Kg
- 0.413
- Supplier
- Siemens AG
- Order number
- 6ES7214-1BD23-0XB0
- Air pressure maximum [hPa]
- 1080
- Air pressure minimum [hPa]
- 860
- Ambient temperature in horizontal mounting position during operation maximum [°C]
- 55
- Ambient temperature in horizontal mounting position during operation minimum [°C]
- 0
- Ambient temperature in vertical mounting position during operation maximum [°C]
- 45
- Ambient temperature in vertical mounting position during operation minimum [°C]
- 0
- Consumed current from supply voltage L1 maximum [mA]
- 200
- Consumed current from supply voltage L1 maximum Note
- 30 to 100 mA (240 V); 60 to 200 mA (120 V); output current for expansion modules (5 V DC) 600 mA
- Delay time at signal change at digital output with resistive load for signal <0> to <1> maximum [µs]
- 10000
- Delay time at signal change at digital output with resistive load for signal <0> to <1> maximum Note
- all outputs
- Delay time at signal change at digital output with resistive load for signal <1> to <0> maximum [µs]
- 10000
- Delay time at signal change at digital output with resistive load for signal <1> to <0> maximum Note
- all outputs
- Depth [mm]
- 62
- Design of the interface at the 1st interface
- Integrated RS 485 interface
- Design of the PLC basic equipment
- Compact
- Design of the sensor connectable 2-wire transmitter
- Yes
- Electrical endurance (switching cycles) for relay outputs maximum
- 10000000
- Electrical endurance (switching cycles) for relay outputs maximum Note
- mechanically 10 million, at rated load voltage 100 000
- Equipment marking acc. to DIN EN 81346-2
- K
- Explosion protection category for dust
- 0
- Explosion protection category for gas
- 0
- Explosion protection marking for intrinsic safety of related equipment EEx ia
- No
- Explosion protection marking for intrinsic safety of related equipment EEx ib
- No
- Galvanic isolation at the digital inputs between the channels
- Yes
- Galvanic isolation at the digital outputs between the channels
- Yes
- Galvanic isolation at the digital outputs between the channels Note
- Relays
- Height [mm]
- 80
- Input current at digital input for signal <1> typical [mA]
- 2.5
- Input delay time at the standard inputs for signal <0> to <1> at rated input voltage maximum [ms]
- 12.8
- Input delay time at the standard inputs for signal <0> to <1> at rated input voltage minimum [µs]
- 200
- Input voltage at digital input at DC rated value [V]
- 24
- Input voltage at digital input at DC Rated value [V]
- 24
- Inrush current maximum [mA]
- 20000
- Inrush current maximum Note
- at 264 V
- Load voltage from supply voltage L+ at DC Rated value [V]
- 24
- Load voltage from supply voltage L+ at DC rated value maximum [V]
- 30
- Load voltage from supply voltage L+ at DC rated value minimum [V]
- 5
- Load voltage from supply voltage L1 at AC Rated value [V]
- 100
- Load voltage from supply voltage L1 at AC rated value maximum [V]
- 250
- Load voltage from supply voltage L1 at AC rated value minimum [V]
- 5
- Load voltage from supply voltage L1 at AC Rated value Note
- 100 V AC to 230 V AC
- Mounting type front mounting
- Yes
- Mounting type rack mounting
- Yes
- Mounting type rail mounting
- Yes
- Mounting type wall mounting
- Yes
- Number of analog inputs
- 0
- Number of analog inputs/outputs addressable maximum
- 64
- Number of analog inputs/outputs for I/O devices expansion maximum
- 35
- Number of analog inputs/outputs for I/O devices expansion maximum Note
- max. 28 inputs and 7 outputs (EM) or max. 0 inputs and 14 outputs (EM)
- Number of analog outputs
- 0
- Number of channels at digital input per potential group Note
- 6 and 8
- Number of channels at digital output per potential group Note
- 3 and 4
- Number of digital inputs
- 14
- Number of digital inputs/outputs addressable maximum
- 256
- Number of digital inputs/outputs for I/O expansion maximum
- 168
- Number of digital inputs/outputs for I/O expansion maximum Note
- max. 94 inputs and 74 outputs (CPU + EM)
- Number of digital outputs
- 10
- Number of digital outputs Note
- Relays
- Number of expansion devices maximum
- 7
- Number of expansion devices maximum Note
- Only expansion modules of the S7-22x series can be used. Due to the limited output current, the use of expansion modules may be limited.
- Number of interfaces acc. to 20 mA (TTY)
- 0
- Number of interfaces acc. to Industrial Ethernet
- 0
- Number of interfaces acc. to PROFINET
- 0
- Number of interfaces acc. to RS 232
- 0
- Number of interfaces acc. to RS 422
- 0
- Number of interfaces acc. to RS 485
- 1
- Number of interfaces acc. to wireless
- 0
- Number of interfaces other
- 0
- Number of interfaces parallel
- 0
- Number of relay outputs Integrated maximum
- 10
- Number of S7 counters
- 256
- Number of S7 timers
- 256
- Output current at digital output for signal <1> Rated value [mA]
- 2000
- Output current with 24 V encoder supply maximum [mA]
- 280
- Power loss [W] typical [mW]
- 10000
- Processing time for 1000 bit operations [s]
- 0.00022
- Processing time for bit operation maximum [µs]
- 0.22
- Product brandname
- Simatic
- Product category
- CPU
- Product component display
- No
- Product component optical interface
- No
- Product extension Main memory expansion
- Yes
- Product family
- S7-200
- Product feature of the memory buffered
- Yes
- Product feature of the memory buffered Note
- Program: Entire program maintenance-free on integral EEPROM, programmable via CPU; data: Entire DB 1 loaded from PG/PC maintenance-free on integral EEPROM, current values of DB 1 in RAM, retentive memory bits, timers, counters, etc. maintenance-free via high-performance capacitor; optional battery for long-term buffering
- Product feature redundancy capability
- No
- Product function at alarm inputs at rated input voltage parameterizable input delay time
- Yes
- Product function at alarm inputs at rated input voltage parameterizable input delay time Note
- I 0.0 to I 0.3
- Product function at digital output parallel switching of outputs for increasing the power
- No
- Product function at the 1st interface MPI
- Yes
- Product function at the 1st interface MPI Note
- As MPI slave for data exchange with MPI masters (S7-300/S7-400 CPUs, OPs, TDs, Push Button Panels); S7-200-internal CPU/CPU communication is possible in the MPI network with restrictions; transmission rates: 19.2/187.5 kbit/s
- Product function at the 1st interface PPI
- Yes
- Product function at the 1st interface PPI Note
- with PPI protocol for program functions, HMI functions (TD 200, OP), S7-200-internal CPU/CPU communication ; transmission rates 9.6/19.2/187.5 kbit/s
- Product function at the 1st interface serial data exchange
- Yes
- Product function at the 1st interface serial data exchange Note
- As freely programmable interface with interrupt facility for serial data exchange with third-party devices with ASCII protocol transfer rates: 1.2 / 2.4 / 4.8 / 9.6 / 19.2 / 38.4 / 57.6 / 115.2 kbps; the PC/PPI cable can also be used as RS 232/RS 485 converter
- Product function at the digital outputs Short circuit protection
- No
- Product function at the digital outputs Short circuit protection Note
- to be provided externally
- Product function at the inputs for counters or technological functions at rated input voltage parameterizable input delay time
- Yes
- Product function at the inputs for counters or technological functions at rated input voltage parameterizable input delay time Note
- (E 0.0 to E 1.5) 30 kHz
- Product function at the standard inputs at rated input voltage parameterizable input delay time
- Yes
- Product function at the standard inputs at rated input voltage parameterizable input delay time Note
- all
- Product function IO-Link master
- No
- Product function with 24 V encoder supply Short-circuit protection
- Yes
- Product function with 24 V encoder supply Short-circuit protection Note
- electronic at 280 mA
- Programming language usable FUP
- Yes
- Programming language usable KOP
- Yes
- Programming language usable STL
- Yes
- Protection function Integrated password protection for user program
- Yes
- Protocol is supported AS-interface protocol
- No
- Protocol is supported ASIsafe (Safety at work) protocol
- No
- Protocol is supported CAN protocol
- No
- Protocol is supported data highway protocol
- No
- Protocol is supported DeviceNet protocol
- No
- Protocol is supported DeviceNet safety protocol
- No
- Protocol is supported EIB/KNX protocol
- No
- Protocol is supported EtherNet/IP protocol
- No
- Protocol is supported Foundation Fieldbus protocol
- No
- Protocol is supported INTERBus protocol
- No
- Protocol is supported INTERBus safety protocol
- No
- Protocol is supported LON protocol
- No
- Protocol is supported MODBus protocol
- No
- Protocol is supported other protocols
- Yes
- Protocol is supported PROFIBus protocol
- No
- Protocol is supported PROFINET CBA protocol
- No
- Protocol is supported PROFINET IO protocol
- No
- Protocol is supported PROFIsafe protocol
- No
- Protocol is supported SafetyBus p protocol
- No
- Protocol is supported SERCOS protocol
- No
- Protocol is supported SUCONET protocol
- No
- Protocol is supported TCP/IP
- No
- Quiescent current of the 2-wire transducer maximum permissible [mA]
- 1
- Relative humidity during operation maximum [%]
- 95
- Relative humidity during operation maximum Note
- RH class 2 in accordance with IEC 1131-2
- Relative humidity during operation minimum [%]
- 5
- Residual current at digital output with signal <0> maximum [µA]
- 0
- Standard for wireless communication Bluetooth
- No
- Standard for wireless communication IEEE 802.11
- No
- Storage capacity of the program memory Integrated [kbyte]
- 12
- Storage capacity of the program memory Integrated Note
- 8 KB with active run-time edit
- Storage capacity of the RAM Integrated [kbyte]
- 20
- Storage capacity of the user memory Integrated [kbyte]
- 8
- Suitability for use safety-related function
- No
- Suitability for use system component
- Yes
- Supply voltage at AC Rated value 120 V
- Yes
- Supply voltage at AC Rated value 230 V
- Yes
- Supply voltage at AC rated value maximum [V]
- 264
- Supply voltage at AC rated value minimum [V]
- 85
- Supply voltage for encoder supply 24 V
- Yes
- Supply voltage for encoder supply 24 V Note
- Permissible range: 20.4V to 28.8V
- Supply voltage frequency for available voltage L1 maximum [Hz]
- 63
- Supply voltage frequency for available voltage L1 minimum [Hz]
- 47
- Switching capacity active power at digital output with filament lamp load maximum [W]
- 200
- Switching capacity active power at digital output with filament lamp load maximum Note
- 30 W with DC, 200 W with AC
- Switching capacity current at digital output with resistive load maximum [A]
- 2
- Total current of digital outputs in all mounting positions up to 40 °C per group maximum [mA]
- 10000
- Total current of digital outputs in horizontal mounting position up to 55 °C per group maximum [A]
- 10
- Transfer rate at the 1st interface as MPI maximum [kbit/s]
- 187.5
- Transfer rate at the 1st interface as MPI minimum [kbit/s]
- 19.2
- Type of electrical connection Plug-in terminals
- Yes
- Type of memory
- EEPROM
- Type of permissible potential difference between different circuits
- 500 V DC between 24 V DC and 5 V DC; 1500 V AC between 24 V DC and 230 V AC
- Type of voltage of the supply voltage
- AC
- Value range of the input voltage at digital input for signal <0> detection
- 0 to 5 V
- Value range of the input voltage at digital input for signal <1> detection
- min. 15 V
- Value range of the output voltage at digital output for signal <1> at DC
- L+/L1
- Width [mm]
- 120.5
- Wire length at digital input shielded maximum [m]
- 500
- Wire length at digital input shielded maximum Note
- Standard input: 500 m, high-speed counters: 50 m
- Wire length at digital input unshielded maximum [mm]
- 300000
- Wire length at digital input unshielded maximum Note
- not for high-speed signals
- Wire length at digital output shielded maximum [m]
- 500
- Wire length at digital output unshielded maximum [m]
- 150
Delivery Information
- Export Control Regulations
- AL : N / ECCN : N
- Standard lead time ex-works
- 1 Day/Days
- Net Weight (lb)
- 0.911 lb
- Product Dimensions (W x L x H)
- Not available
- Packaging Dimension
- 4.291 x 6.063 x 2.992
- Package size unit of measure
- in
- Quantity Unit
- 1 Piece
- Packaging Quantity
- 1
Additional Product Information
- EAN
- 4025515071006
- UPC
- 662643188387
- Commodity Code
- 85371091
- LKZ_FDB/ CatalogID
- ST9.72
- Product Group
- 4301
- Country of origin
- China
- RoHS Compliance
- Since: 03/31/2008
- Returnable
- Yes
- Obligation Category for taking back electrical and electronic equipment after use
- No obligation to take back electrical and electronic equipment after use
Prodotti correlati
Informazioni aggiuntive
The 6ES72141BD230XB0 is a SIMATIC S7-1200 CPU 1214C from Siemens, a part of its industrial automation market. This microcontroller is equipped with an integrated microprocessor and a range of integrated functions, enabling users to automate a variety of tasks and processes in industrial settings.
The 6ES72141BD230XB0 has a 144 KB user-programmable memory, 2 MB of working memory, and a 2 MB memory for the integrated functions. It also has two integrated Ethernet ports, two RS232 ports, two USB ports, and a PROFINET interface for communications, as well as four digital inputs and four digital outputs for connecting to external devices. This CPU is certified for SIL3, PLd and Cat.3 according to EN ISO 13849-1.
The 6ES72141BD230XB0 is designed to be used with the SIMATIC S7-1200 automation system, which provides users with an extensive suite of features and tools for creating, managing, and controlling efficient and reliable industrial automation solutions. The CPU is compatible with a range of programming languages, including SCL, ST, LAD, FBD and CFC. It is also compatible with a range of engineering software, such as TIA Portal, WinCC, and S7-PLCSIM Advanced.