Weidmuller
1123850000
1 / 6
Descrizione
TERMSERIES, Relay module, Number of contacts: 2 CO contact AgNi 5µm Au, Rated control voltage: 24 V DC ±20 %, Continuous current: 8 A, Tension-clamp connection- Part Number
- 1123850000
€14.48
netSpedizione da:
€25.00
1
Metodi di pagamento:
- Migliore offerta da:
Fornitore Automa.Net di fiducia- Disponibilità:
- 1 pz.DisponibileAggiornato il: 22-11-2024
- Garanzia:
- 12 mesi
- Consegna stimata:
- 27 novembre - 02 dicembre a Regno Unito
- Condizione:
- Nuovo sigillato in fabbrica
Nuovo sigillato in fabbrica - Un articolo nuovo di zecca, inutilizzato, non aperto, non danneggiato, nella sua confezione originale sigillata dal produttore.
Informazioni sulla spedizione
Processo di Pagamento Sicuro
Politiche di Reso e Rimborso
Politiche di Spedizione
Politiche di Garanzia
General Data
- Rail
- TS 35
- Test button
- No
- Mechanical switch position indicator
- No
- Colour
- black
Approvals
- Approvals
- CE, CULUS, DNV GL, EAC
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Width
- 12.8 mm
- Width (inches)
- 0.504 inch
- Height
- 90.5 mm
- Height (inches)
- 3.563 inch
- Depth
- 87.8 mm
- Depth (inches)
- 3.457 inch
- Net weight
- 56.4 g
Connection Data
- Wire connection method
- Tension-clamp connection
- Stripping length, rated connection
- 8 mm
- Clamping range, rated connection
- 1.5 mm²
- Clamping range, min.
- 0.14 mm²
- Clamping range, max.
- 2.5 mm²
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 14
- Wire cross-section, solid, min.
- 0.14 mm²
- Wire cross-section, solid, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded, min.
- 0.14 mm²
- Wire connection cross section, finely stranded, max.
- 2.5 mm²
- Wire cross-section, finely stranded, min. (AWG)
- AWG 26
- Wire cross-section, finely stranded, max. (AWG)
- AWG 14
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
- 0.14 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
- 1.5 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.
- 0.14 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.
- 1.5 mm²
- Twin wire-end ferrules, min.
- 0.5 mm²
- Twin wire-end ferrules, max.
- 1 mm²
- Blade size
- 0.6 x 3.5 mm
- Gauge to IEC 60947-1
- A1, B1
Rated Data Ul
- Ambient temperature (operational), max.
- 60 °C
- Connection cross-section AWG, min.
- AWG 26
- Connection cross-section AWG, max.
- AWG 14
- Type of conductor
- rigid copper conductor, flexible copper conductor
- Pollution severity level
- 2
Contact Data
- Contact type
- 2 CO contact (AgNi 5µm Au)
- Mechanical service life
- 30 x 106 switching cycles
Input
- Rated control voltage
- 24 V DC ± 20 %
- Rated current DC
- 20.5 mA
- Power rating
- 495 mW
- Pull-in/drop-out voltage, typ.
- 17 V / 3 V DC
- Pull-in/drop-out current, typ.
- 14 mA / 2 mA DC
- Status indicator
- Green LED
- Protective circuit
- Free-wheeling diode, Reverse polarity protection
- Coil voltage of the replacement relay deviating from the rated control voltage
- No
- Coil voltage of the replacement relay
- 24 V DC
Classifications
- ETIM 6.0
- EC001437
- ETIM 7.0
- EC001437
- EClass 9.0
- 27-37-16-01
- EClass 9.1
- 27-37-16-01
- EClass 10.0
- 27-37-16-01
Output
- Rated switching voltage
- 250 V AC
- Max. switching voltage, AC
- 250 V
- Max. switching voltage, DC
- 250 V
- Continuous current
- 8 A
- Inrush current
- 15 A / 4 s
- AC switching capacity (resistive), max.
- 2000 VA
- DC switching capacity (resistive), max.
- 192 W @ 24 V
- Switch-on delay
- ≤ 6 ms
- Switch-off delay
- < 18 ms
- Min. switching power
- 1 mA @ 1 V
- Max. switching frequency at rated load
- 0.1 Hz
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Rated voltage
- 300 V
- Surge voltage category
- III
- Pollution severity
- 2
- Protection degree
- IP20
- Dielectric strength, Input/Output
- 1.2 kVeff / 5 s
- Creepage and clearance distance input – output
- ≥ 5.5 mm
- Dielectric strength of neighbouring contacts
- 2.5 kVeff / 1 Min.
- Dielectric strength of open contact
- 1 kVeff / 1 min
- Dielectric strength to mounting rail
- 4 kVeff / 1 Min.
- Impulse withstand voltage
- 6 kV (1.2/50 µs)
Temperatures
- Humidity
- 5-95% relative humidity, Tu = 40°C, without condensation
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -40 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -40 °C...60 °C
- Storage temperature
- -40 °C...85 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E141197
Further Details Of Approvals / Standards
- Standards
- EN 50178, EN 55011, EN 61000-6-1, 2, 4
- Certificate No. (DNVGL)
- TAA00001E5
- Certificate no. (cULus)
- E141197
Prodotti correlati
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro