1353000000

1 / 2

Descrizione

Surge voltage arrester, Low voltage, with remote contact, TN-C, IT without N

Part Number: 1353000000

Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
Sconti sulla rivendita fino al 40%!

Invia una richiesta di prezzo

1

Metodi di pagamento:

Richiedete un preventivo e vi invieremo informazioni su disponibilità e prezzi.

General Data

Colour: black, orange
Design: Installation housing; 3TE, Insta IP 20
Optical function display: green = OK; red = arrester is defective - replace
Protection degree: IP20
Rail: TS 35
UL 94 flammability rating: V-0
Version: with remote contact

Approvals

Approvals: CE, EAC, KOREANCERT, OEVE
ROHS: Conform

Insulation Coordination Acc. To En 50178

Pollution severity: 2
Surge voltage category: III

Rated Data Iec / En

Combined pulse U: 10 kV
Discharge current I: 12.5 kA
Energy coordination (≤10 m): Type II, Type III
Follow-on current extinguishing capability I: Not available due for technical reasons
Frequency range, max.: 60 Hz
Frequency range, min.: 50 Hz
Fuse: 125 A gL > (if back up fuse > 125 A)
Leakage current at U: 100 µA
Low voltage network: TN-C, IT without N
Max. continuous voltage, Uc (AC): 600 V
Number of poles: 3
Protection level U: ≤ 2.35 kV
Rated voltage (AC): 480 V
Requirements category acc. to IEC 61643-11: Type II, Type III
Requirements class, acc. to EN 61643-11: T2, T3
Response time: ≤ 25 ns
Short-circuit current rating I: 25 kA
Signalling contact: 250 V 1A 1CO
Standards: IEC61643-11, EN61643-11
Temporary surge voltage (over-voltage) - TOV: 820 V
Voltage type: AC

Dimensions And Weights

Width: 53.4 mm
Width (inches): 2.102 inch
Height: 106 mm
Height (inches): 4.173 inch
Depth: 69 mm
Depth (inches): 2.717 inch
Mounting dimension - height: 75 mm
Net weight: 425 g

Connection Data

Wire connection method: Screw connection
Type of connection: Screw connection
Stripping length, rated connection: 15 mm
Tightening torque, min.: 2 Nm
Tightening torque, max.: 3 Nm
Clamping range, rated connection: 16 mm²
Clamping range, min.: 1.5 mm²
Clamping range, max.: 35 mm²
Wire cross-section, solid, min.: 1.5 mm²
Wire cross-section, solid, max.: 16 mm²
Wire connection cross-section, finely stranded, min.: 1.5 mm²
Wire connection cross section, finely stranded, max.: 25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 1.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 50 mm²
Connection cross-section, stranded, min.: 1.5 mm²
Connection cross-section, stranded, max.: 50 mm²

Tender Specification Sheets

Long specification: Multi-pole lightning arrestor according to the requirements of Class II/III acc. to IEC 61643-11, EN61643-11:2013. Consisting of V0 material, the arrestor provides overvoltage protection in applications acc. to IEC 61643-12. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the power supply for the equipment that needs protection, in a standard installation/electrical distribution enclosure. The VPU II 3 R 600 V/25 kA is used in the three-phase TN-C mains network. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. The functional state is also displayed by a voltage-free signalling contact (changeover). Rated voltage: 600 VAC In/max (8/20 µs): 12.5/25 kA protection level < 2.35 kV 25 kA short-circuit strength with max. back-up fuse of 125 A gl telecommunication output: contact: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU II 3 R 600 V/25 kA Order No. 1353000000 or equivalent
Short specification: Class II arrester with In/Imax: 12.5/25 kA suitable for three-phase 600 V TN-C mains systems. Protection level < 2.1 kV. With remote alert Type: Weidmüller VPU II 3 R 600 V/25 kA Order no. 1353000000 or equivalent

Classifications

ETIM 6.0: EC000941
ETIM 7.0: EC000941
EClass 9.0: 27-13-08-05
EClass 9.1: 27-13-08-05
EClass 10.0: 27-13-08-05
UNSPSC: 30-21-19-21

Connection Data, Remote Alert

Connection type: PUSH IN
Stripping length: 8 mm
Cross-section for connected wire, solid core, min.: 0.14 mm²
Cross-section for connected wire, solid core, max.: 1.5 mm²

Temperatures

Humidity: 5 - 95% rel. humidity
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 80 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...80 °C

Prodotti correlati