Weidmuller
2489740000
ACT20P-CI-VO-P
- Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
- Sconti sulla rivendita fino al 40%!
Invia una richiesta di prezzo
1
Metodi di pagamento:
Un totale di 2 Parts In-Stock da 9 Distributors
Condizioni del prodotto:
Offerta con tempi di consegna del produttore
Spedizione in:Su richiesta
Miglior prezzo:
€112.17
Additional Information
- Part Number
- 2489740000
General Data
- Accuracy
- ±0,1 % FSR max., 0,05 % FSR typ.
- Configuration
- none
- Current consumption
- ≤60 mA (24V power supply, 20mA output)
- Galvanic isolation
- 3-way isolator, between input ⁄ output ⁄ supply
- Rail
- TS 35
- Step response time
- ≤ 0,5 ms
- Temperature coefficient
- 80 ppm/K
- Voltage supply
- 20…30 V DC
Dimensions And Weights
- Width
- 12.5 mm
- Width (inches)
- 0.492 inch
- Height
- 127.1 mm
- Height (inches)
- 5.004 inch
- Depth
- 113.7 mm
- Depth (inches)
- 4.476 inch
- Weight
- 110 g
- Net weight
- 120 g
Connection Data
- Type of connection
- PUSH IN
- Wire connection cross section AWG, min.
- AWG 26
- Wire connection cross section AWG, max.
- AWG 14
- Wire cross-section, solid, min.
- 0.2 mm²
- Wire cross-section, solid, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded, min.
- 0.2 mm²
- Wire connection cross section, finely stranded, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
- 0.2 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
- 2.5 mm²
Input
- Number of inputs
- 1
- Sensor supply
- > 17 V DC at 20 mA
- Input signal
- 2-/3-wire transmitter, Current source
- Input current
- 0...20 mA, 4…20mA
- Voltage drop
- ≤ 1 V
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-90
- EClass 10.0
- 27-21-01-20
Output
- Number of outputs
- 1
- Output voltage, note
- 0…10 V (if input: 0…20 mA), 2…10 V (if input: 4…20 mA)
- Load impedance voltage
- ≥ 600 kΩ
Product Information
- Product information
- The fixed DC repeater ACT20P-CI-VO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is converted linear and galvanic isolated into an analogue output voltage signal. The power supply is galvanically isolated from input and output (3-way isolation). Features The active or passive mA current signal inputs are completely electrically isolated. Front LED indicates operation status. 3-way galvanic isolation between input, output and power supply
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- EMC standards
- EN 61326-1
- Galvanic isolation
- 3-way isolator, between input ⁄ output ⁄ supply
- Impulse withstand voltage
- 4 kV (1.2/50 µs)
- Insulation voltage
- 2 kV inputs / outputs / power supply
- Pollution severity
- 2
- Surge voltage category
- III
Temperatures
- Humidity
- 5...95 %, no condensation
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -20 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -20 °C...60 °C
- Storage temperature
- -40 °C...85 °C
Altre categorie
AttuatoriBlocchiCavi, tubi e manichetteCompressoriControlloGiunzioni e raccordiCilindri e PistoniElettronicaFiltriHVACPC industriali e HMIsIlluminazioneTecnica lineareMotoriAlimentatoreTrasmissione di potenzaPompe e ValvoleEnergia rinnovabileRoboticaGuarnizioni, Anelli e ConnettoriSensori e dispositivi di misuraStrumenti e AccessoriCNCAltro