8897100000

RCIKIT 115VAC 2CO LD

8897100000

8897100000

8897100000

8897100000

8897100000

8897100000

8897100000

Ottenete termini di pagamento fino a 90 giorni da 500+ fornitori.
Sconti sulla rivendita fino al 40%!

Invia una richiesta di prezzo

1

Metodi di pagamento:

Richiedete un preventivo e vi invieremo informazioni su disponibilità e prezzi.

Offerta con tempi di consegna del produttore

Spedizione in:Su richiesta

Miglior prezzo:

€14.00

Additional Information

Part Number: 8897100000

General Data

Rail: TS 35
Test button: No
Mechanical switch position indicator: No
Colour: black

Approvals

Approvals: CE, DNV GL, EAC
ROHS: Conform

Dimensions And Weights

Width: 15.8 mm
Width (inches): 0.622 inch
Height: 77 mm
Height (inches): 3.031 inch
Depth: 70.2 mm
Depth (inches): 2.764 inch
Net weight: 63.4 g

Connection Data

Wire connection method: Screw connection
Stripping length, rated connection: 8 mm
Tightening torque, min.: 0.5 Nm
Tightening torque, max.: 0.7 Nm
Clamping range, rated connection: 2.5 mm²
Clamping range, min.: 1 mm²
Clamping range, max.: 2.5 mm²
Wire cross-section, solid, min.: 1 mm²
Wire cross-section, solid, max.: 2.5 mm²
Wire connection cross-section, finely stranded, min.: 1 mm²
Wire connection cross section, finely stranded, max.: 2.5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: 1 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: 2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.: 1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.: 2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.: 1 mm²
Wire cross-section, finely stranded, two clampable wires, max.: 1.5 mm²
Blade size: size PZ1

Contact Data

Contact type: 2 CO contact (AgNi 90/10)
Mechanical service life: AC coil 5 x 106 switching cycles, DC coil 10 x 106 switching cycles

Input

Rated control voltage: 115 V AC
Rated current AC: 7 mA
Power rating: 0.8 VA
Pull-in/drop-out voltage, typ.: 86.3 V / 17.3 V AC
Coil resistance: 8100 Ω ± 15 %
Status indicator: red LED

Classifications

ETIM 6.0: EC001437
ETIM 7.0: EC001437
EClass 9.0: 27-37-16-01
EClass 9.1: 27-37-16-01
EClass 10.0: 27-37-16-01
UNSPSC: 30-21-19-17

Output

Rated switching voltage: 250 V AC
Max. switching voltage, AC: 400 V
Continuous current: 8 A
Inrush current: 15 A / 4 s
AC switching capacity (resistive), max.: 2000 VA
DC switching capacity (resistive), max.: 192 W @ 24 V
Switch-on delay: ≤ 10 ms
Switch-off delay: ≤ 6 ms
Min. switching power: 1 mA @ 24 V, 10 mA @ 12 V, 100 mA @ 5 V
Max. switching frequency at rated load: 0.1 Hz

Product Information

Product information: IP20 without connected conductor at complete opened clamping yoke connection.

Environmental Product Compliance

REACH SVHC: Lead 7439-92-1

Insulation Coordination

Rated voltage: 250 V
Surge voltage category: III
Pollution severity: 2
Insulating material group: IIIa
Protection degree: IP20
Dielectric strength, Input/Output: 5 kVeff / 1min
Creepage and clearance distance input – output: ≥ 8 mm
Dielectric strength of neighbouring contacts: 2.5 kVeff / 1 Min.
Dielectric strength of open contact: 1 kVeff / 1 min
Impulse withstand voltage: 5 kV (1.2/50 µs)

Temperatures

Humidity: 40 °C / 93 % rel. humidity, no condensation
Operating temperature, max.: 70 °C
Operating temperature, min.: -40 °C
Storage temperature, max.: 70 °C
Storage temperature, min.: -40 °C
Operating temperature: -40 °C...70 °C
Storage temperature: -40 °C...70 °C

Further Details Of Approvals / Standards

Standards: DIN EN 50178
Certificate no. (CSA) relay: 249409-2426937
Certificate no. (CSA) base: 249409-2295474
Certificate No. (DNVGL): TAA000011A
Certificate no. (cURus) relay: E224238
Certificate no. (cURus) base: E223759

Prodotti correlati