Ricerca prodotti

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

Circuit-breaker sz s00, for motor protection, class 10, a-release 4.5...6.3a, n-release 82a screw connection, standard sw. capacity

BUSBAR, W/O END CAPS, 3-PHASES + NEUTRAL Busbar, w/o End Caps,3x(1-Phase+Access),1,016 mm,Not UL Rated,1 Side/Center Infeed: 65A/120A, ,for use with 5SY4, 5SY5 Supplementary Protectors

Contactor. AC3 45KW/400v. 1NO+1NC. 230VAC 50/60HZ. 3-pole. 3NO. size s3. screw terminals

Power Supply, CompactLogix, DC, 19.2-32V DC Input, 5V at 4 A or 24V at 2 A Output

This product is part of the Modicon M221 range, an offer of programmable logic controllers for hardwired architectures. This logic controller provides 14 discrete inputs and 10 relay ethernet outputs with 10bit input resolution, normally opened relay output. It is a Modicon logic controller with a rated supply voltage of 100V to 240V AC, an output voltage of 5V to 125V DC, 5V to 250V AC and an output current of 2A with sink or source input logic. This product requires minimal installation and offers tremendous versatility. Integrated connections are USB port with mini B USB 2.0 connector, non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface and ethernet with RJ45 connector. It is a Modicon M221 controller with a network frequency of 50/60Hz, 256KB for internal variables RAM, user application and data RAM, a built-in flash memory of 256KB and a SD card memory capacity of 2GB. It is an IP20 rated product. Its dimensions are 110mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.395kg. This product is certified by CE, IACS E10, RCM, ABS, LR, DNV-GL, CSA, EAC and CULus. It meets EN/IEC 60664-1, EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. It supports DIN rail mount. Achieve benchmark performance while increasing profitability with the Modicon M221 through intuitive machine programming with SoMachine Basic, ready-to-use applications and function blocks

SIMATIC s7-1500, frontconnector push-in type, 40pin, for 35mm wide modules incl. 4 jumpers and cable strap

Molded Case Ckt-BKR, 250A J Frame, 35 kA at 480V, T/M - Adjst Thrm / Adjst Mgntc, 3 Poles, 80A, 80 Percent MCCB, No Bus Bar Mounting, NONE, None, NONE, None

Contactor, AC-3, 18.5KW/400V, 1NO+1NC, AC 230v 50/60HZ, 3-pole, sz s0 screw terminal

Output Module, CompactLogix, DC Digital, 20.4-36.4VDC, 16 Current Sourcing Point at 0 .5 A Output, 16 Point

TERM BLOCK,SCREW,GND & GND-NEUTRAL,35 Terminal Block,Screw Connection,Ground & Ground-neutral,Terminal Size 35,Green/Yellow,Ground-neutral up to 125 A, UL File E80027 inVol. 1 Sec. 11

SIMATIC DP, ELECTRON. MODULE F. ET200S, 30 MM WIDTH, 1 RELAY OUTPUT (2 NO-CONTACTS) OUTPUT CURRENT 5A, RATED VOLTAGE 24V DC AND 24 ... 230V AC, USEABLE UP TO CAT.4 / SIL 3 IF CONTROLLED BY A F-DO (E.G. 6ES7138-4FB02-0AB0)

SENTRON, cylindrical fuse link, Class CC, 20 A, slow, current limiting, Un AC: 600 V

SUPPLEMENTARY PROTECTOR,2P,1A,CURVE C 6KA, 2POLE, C, 1A, D=70MM MINIAT. CIRCUIT-BREAKER 4

Power Supply, Flex I/O, 120/230 VAC Input, 3.0 A @24VDC Output, Open Style, DIN Mount, IP20

SIMATIC dp, 5 electron. modules for et 200s, 4 do standard DC 24v/2a, 15 mm width 5 pieces per packaging unit

SIMATIC s7-1500, digital input module di16 x DC24V, 16 channels in groups of 16 input delay 0.05 ... 20ms input type 3 (iec 61131) diagnosis, processalarms

SU203M-C6 Miniature Circuit Breaker C-Char., 10kA, 6A, 3P UL489

SIMATIC dp, 1 electron. modules for et 200s, 8 do DC24v/0,5a 15 mm width, 1 pieces per packaging unit

LOGO! dm8 12/24r, exp. module pu/i/o 12, 24v/12v/24v/relais, 2te, 4 di/4 do for LOGO! 8