Wyszukiwarka produktów

SIMATIC NET IE FC RJ45 PLUG 145 RJ45 FEMALE CONNECTOR WITH RUGGED METAL HOUSING AND FC CONNECTING METHOD, 145 DGR CABLE OUTLET 1 PACK = 1 PCS

Rev. comb., AC3, 4KW/400V DC 110v 3-pole, sz s00 screw terminal electr. and mech. interlock

LED MODULE WITH INTEGRATED LED 6-24V AC/DC YELLOW, SCREW TERMINAL, FOR BASE MOUNTING

MUSHROOM PUSHBUTTON, 22MM, ROUND, PLASTIC WITH METAL FRONT RING, GREEN, 40MM, MOMENTARY CONTACT TYPE

Rly other 3RB3123-4sb0-3RB3123-4sb0 1oe 1NO

Semiconductor relay 3RF2. 1-ph. construction width 45 mm. 20 a 24-230 v / 4-30 V DC screw terminal

SIMATIC s7-1500, cm ptp rs422/485 ba communication module for serial connection rs422, rs485 freeport, 3964(r), uss, 19200 kbit/s, 15-pin sub-d female connector

SIPLUS NET SCALANCE XC206-2SFP -40?+70 °C With conformal coating based on 6GK5206-2BS00-2AC2 . Manageable Layer 2 IE Switch 6x 10/100 Mbit/s RJ45 ports 2x 100/1000 Mbit/s SFP 1x console port; Diagnostics LEDs Redund. power supply Temp. range -40 °C to +70 °C Mounting: DIN rail/S7 mounting rail Wall; Redundancy functions Office features (RSTP. VLAN. ...); PROFINET IO device; Ethernet/IP-compliant; C-plug slot; C-plug slot

SITOP PSE200U 3 A NEC CLASS 2 SELECTIVITY MODULE 4-CHANNEL INPUT: 24 V DC OUTPUT:24 V/3 A DC PER CHANNEL OUTPUT CURRENT ADJUSTABLE 0.5-3

SITOP PSU100C 12 V/2 A STABILIZED POWER SUPPLY INPUT: AC 100-230 V OUTPUT: DC 12 V/2 A

SITOP PSU6200 24 VDC / 1.3 A Stabilized power supply

Special type Circuit breaker size S00 for motor protection, CLASS 10 A-release 9...12 A N-release 163 A screw terminal Standard switching capacity with transverse auxiliary switches 1 NO+1 NC Ambient temperature -50 °C 500 switching cycles

WINCC ARCHIVE POWERPACK V7.3 UPGRADING FROM 10000 TO 30000 ARCHIVE TAGS, FOR SIMATIC WINCC V7.3, RUNTIME SW, SINGLE LICENSE, COUNT RELEVANT

WinCC Powerpack RT 8192/65536 for WinCC V7.5. runtime license without version change from 8192 to 65536 power tags. Single license. license key download E-mail address required for delivery

MOVING PART FOR C.BREAKER SACE EMAX2 E1.2B 1000 THREE-POLE WITH SOLID-STATE RELEASE IN AC EKIP/DIP-LI R 1000 FITTED WITH: 4 AUXILIARY CONTACT AND C.BREAKER IN POSITION OPEN-CLOSED

Single channel and "dual" channel safety relay. Power supply 24VAC/VDC. Relay outputs 3NO/1NC

The CM-MPS.11P is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 90-170 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay is also suitable to monitor single-phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as well as an interrupted neutral. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.