Product Search

Assembled shielded round cable; connection 1: D-SUB socket strip (1x 9-position); connection 2: D-SUB pin strip (1x 9-position); cable length: 4 m

Round cable set; controller: Mitsubishi Electric MELSEC Q (Y81P); connection 1: D-SUB socket strip (1x 37-position); connection 2: IDC/FLK socket strip (4x 14-position); cable length: 3 m

License for activating the firewall/router and VPN redundancy function on an FL MGUARD device pair

Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block

VARIOFACE 16-channel module intended for use with Honeywell® Experion C300 24 V digital IOTA, right-hand version, 3 A, 120 V

Safety relay for SIL 3 high- and low-demand applications, also approved in accordance with EN 50156, Germanischer Lloyd, and EN ISO 13849, emergency stop and safety door monitoring, 1-channel, 2 enabling current paths, 1 signal contact, plug-in screw terminal blocks, width: 22.5 mm

Fuse terminal block with LED for mounting on NS 35, for miniature circuit breakers, terminal width: 8.2 mm, color: Black

Reversing Contactor, 9 A, 24V50/60Hz/24VDC Elec Cl, 1 NOC & 3 NCC, 24V DC Electronic, Line Side Coil Termination, Screw Terminals, Motor Load

Combination Module, On-Machine Distributed Input/Output, 24V DC, 8 Point, m12

Programmable Limit Switch Module, ControlLogix, 16 DC Inputs, 16 Current Sourcing DC Outputs, With Resolver Interface

Cable, CompactLogix, Bus Expansion, Left to Left, 1 m, Operating Temperature 0 1/4C to 60 1/4C (32 1/4F to +140 1/4F)

Feedback Cable, Non-Flexible, High Resolution and Incremental Encoder Feedback, 300V, Motor End Bayonet Connector - Drive End FlyingLeads, 1 m Length, Black Jacket, Industrial Grade Thermoplastic Elastomer Jacket, Motor, UL Registered to AWM Requirements

20A, 22 A at 20 Hp, 600V AC Three-Phase, IP20/NEMA/UL 1, No Feedback, No HIM - Blank Plate, No Communication Module, W/O EMC Filt & ComModeChoke, Brake IGBT Installed, No Internal Brake Resistor, D Frame, Enhanced Control with 24V I/O, Documentation

Accessory, Antiglare, Overlay, Quantity of 3, PanelView 550

Servo Motor, Rotary, Low Inertia, IEC, 240V AC, 1024 Sin/Cos, 5000 rpm Maximum, 4.18 N-M, 1/4 Turn Right Angle Rotatable DINConnector, Hiperface Multi-Turn Absolute Encoder Feedback, 24V DC Brake, 100 mm Bolt Circle Metric Flange Mounting, Keyed Shaft, Standard

These industrial heavy duty limit switches are applied in almost any environments. This offset limit switch lever arm is used on any of the 9007C rotary head limit switches. This offset cast zinc lever arm is 2.00 inches long. This lever arm has an offset of 0.438 inches. This lever arm has a standard roller that is hardened oil impregnated sintered iron. The lever arm roller is 0.625 inch in diameter and 0.25 inch wide. This roller lever has spring return operator which is made of cast zinc. It weighs 0.05kg. It is associated with complete products such as 9007C and 9007AW. The associated heads are 9007T5, 9007N, 9007A, 9007T10, 9007B and 9007C. The 9007 series limit switches are designed to withstand harsh industrial environments and are available in a wide range of options.