Wyszukiwarka produktów

SIMATIC s7-1200, spare part i/o terminal block gold analog signal module 8ch/16ch (4 pieces w. 7 screws eACh)

SIMATIC s7-1500f, cpu 1518f-4 pn/dp, central processing unit with working memory 4,5 mb for program and 10 mb for data, 1. interface, PROFINET irt with 2 port switch, 2. interface, ethernet, 3. interface, ethernet, 4. interface, PROFIBUS, 1 ns bit-performance, SIMATIC memory card necessary

SIMATIC S7-1500. CPU 1516-3 PN/DP. central processing unit with 1 MB work memory for program and 5 MB for data. 1st interface: PROFINET IRT with 2-port switch. 2nd interface: PROFINET RT. 3rd interface: PROFIBUS. 10 ns bit performance. SIMATIC Memory Card required

SIMATIC S7-300 CPU315F-2 PN/DP, CENTRAL PROCESSING UNIT WITH 512 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

Inline, Analog input terminal, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection technology: 2-, 3-, 4-conductor, transmission speed in the local bus: 2 Mbps, degree of protection: IP20, including Inline connectors and marking fields

The VARIOFACE feed-through module implements a 1:1 connection between screw connection terminal blocks and a D-SUB miniature socket strip (number of positions: 37). A separate ground tap is available.

SIMATIC s7-1500 compact cpu cpu 1511c-1pn. central processing unit with working memory 175 kb for program and 1 mb for data. 16 digital inputs. 16 digital outputs. 5 analog inputs. 2 analog outputs. 6 high speed counters. 4 high speed outputs for pto/pwm/frequency output 1. interface PROFINET irt with 2 port switch. 60 ns bit-performance. incl. front connector push-in. SIMATIC memory card necessary

Inline function terminal for pulse width and frequency modulation or activation of impulse-driven motor control parts with pulse/direction interface, two outputs for 5 V or 24 V

Terminal Block, ControlLogix, 36 Pin, Spring-Clamp, with Low Profile Housing

SIMATIC S7-1200. spare part. I/O terminal block tin-coated. in push-in design. for CPU 1217C on input side (4 units with 16 pins each)

Terminal Block, ControlLogix, Screw, 36 Pin, with Low Profile Housing

SIMATIC s7-1200, spare part i/o terminal block gold signal board (4 pieces w. 6 screws eACh)

SIMATIC S7-300 CPU 317-2 PN/DP, CENTRAL PROCESSING UNIT WITH 1 MB WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 50 KB

SIMATIC dp, cpu 1510sp f-1 pn for et 200sp, central processing unit with working memory 150 kb for program and 750 kb for data, 1. interface PROFINET irt with 3 port switch, 72 ns bit-performance, SIMATIC memory card necessary, busadapter necessary for port 1 and 2

SIMATIC S7-1500F. CPU 1516F-3 PN/DP. central processing unit with 1.5 MB work memory for program and 5 MB for data. 1st interface: PROFINET IRT with 2-port switch. 2nd interface: PROFINET RT. 3rd interface: PROFIBUS. 10 ns bit performance. SIMATIC Memory Card required

SIMATIC s7-1200, cpu 1211c, compact cpu, DC/DC/relay, onboard i/o 6 di 24V DC 4 do relay 2a 2 ai 0 - 10V DC, power supply DC 20.4 - 28.8 V DC, program/data memory 30 kb

SIMATIC s7-1200, spare part i/o terminal block tin cpu1211c/1212c bottom connector (4 pieces w. 8 screws eACh)

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend

SIMATIC S7-300 CPU 319-3 PN/DP, CENTRAL PROCESSING UNIT WITH 2 MBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE DP-MASTER/SLAVE, 3. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY