Schneider Electric
STBDDO3410K
digital output kit, Modicon STB, standard, 24V DC, 4 O
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Łącznie 5 części w magazynie od 15 dostawców
Stan produktu:
Oferta z czasem realizacji przez producenta
Wysyłka:Na zapytanie
Najlepsza cena:
€39.33
Additional Information
- Part Number
- STBDDO3410K
- UNSPSC
- 32151701
- Tariff Code
- 8538908180
- Country of Origin
- ID
Environment
- Product Certifications
- FM Class 1 Division 2 || CSA || UL
- Ambient Air Temperature For Storage
- -40...185 °F without derating
- Standards
- IEC 61131-2
- Ambient Air Temperature For Operation
- 0-60 °C without derating)
- Shock Resistance
- 30 gn 11 ms IEC 88 reference 2-27
- Vibration Resistance
- 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
- Ip Degree Of Protection
- IP20 conforming to IEC 61131-2 class 1
- Pollution Degree
- 2 IEC 60664-1
- Ambient Air Temperature For Storage
- -40-85 °C without derating
- Relative Humidity
- 95-95 % 60-60 °C without condensation
- Operating Altitude
- <= 6561.68 ft (2000 m)
- Ambient Air Temperature For Operation
- 32...140 °F without derating
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Insulation Between Channels And Logic Bus
- 1500 V for 1 minute
- Cold Swapping
- yes
- Height
- 13.9 mm
- Reset
- manual reset COM fault
- Absolute Maximum Voltage
- 56 V 1.3 ms
- Discrete Output Logic
- positive or negative
- Status Led
- 1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (OUT1 to OUT4) || 1 LED (Red) module error (ERR)
- Output Voltage
- 19.2...30 V DC
- Hot Swapping Fallback
- yes for standard NIMs
- Maximum Load Inductance
- 500 mH 4 Hz
- Supply
- power distribution module
- Response Time
- 560 µs off-to-on || 870 µs on-to-off
- Protection Type
- power protection integrated fuse on PDM time lag 10 A || reverse polarity protection || short-circuit protection || thermal overload protection
- Surge Current
- 5 A 0.5 ms
- Current Consumption
- 70 mA 5 V DC logic bus
- Marking
- CE
- Net Weight
- 0.11 kg
- Discrete Output Current
- 500 mA
- Fallback Status
- state 0 basic NIMs || user configurable standard NIMs
- Minimum Load
- 0.5 mA
- Width
- 128.3 mm
- Overvoltage Category
- II
- Depth
- 70 mm
- Product Compatibility
- power distribution module STBPDT3100/3105 || I/O base STBXBA1000
- Maximum Leakage Current
- 0.4 mA at state 0 30 V
- [Us] Rated Supply Voltage
- 24 V DC
- Maximum Load Capacitance
- 50 µF
Specifications
- Discrete Output Type
- solid state
- Range Of Product
- Modicon STB distributed I/O solution
- Discrete Output Voltage Type
- DC
- Product Or Component Type
- standard digital output kit
- Discrete Output Voltage
- 24 V
- Discrete Output Number
- 4
- Kit Composition
- STBXTS1100, 6-terminal screw type connector || STBXTS2100, 6-terminal spring clamp connector || STBXBA1000 base || STBDDO3410 module