Square D
TSXCAY33
- Termin płatności do 90 dni od 500+ dostawców.
- Rabaty na odsprzedaż do 40%!
Wyślij zapytanie o cenę
1
Metody płatności:
Additional Information
- Part Number
- TSXCAY33
- UPC
- 785901105701
Main
- Commercial Status
- Commercialised
- Range of product
- Modicon Premium Automation platform
- Product or component type
- Motion control modules
- Product specific application
- For servo motors
- Servo loop type
- Proportional to overshoot compensation and gain switching 4 ms
- Checks
- Presence of voltage/sensor feedback counter input
- Checks
- Validity of parameters
- Checks
- Sensor power supply
- Checks
- Proper execution of movement
- Checks
- Encoder coupling, servo drive present, emergency stop
- Checks
- Consistency of commands
Complementary
- Speed profile path
- Trapezoidal or parabolic
- Resolution
- >= 0.5 position units per point
- Length of axis
- 256...32000000 P
- Acquisition speed
- >= 54000 points/mn
- Acceleration time
- 8 ms...10 s
- Operating mode
- Automatic
- Operating mode
- Direct drive mode
- Operating mode
- FOLLOWER
- Operating mode
- Manual
- Operating mode
- OFF
- Type of axis
- Limited axis
- Type of axis
- 2/3 axis linear interpolation
- I/O modularity
- 3 axes
- Input compatibility
- Absolute encoder parallel output ABE7CPA11
- Input compatibility
- With 2-wire/3-wire sensor (24 DC) auxiliary input
- Input compatibility
- Incremental encoder 5 V DC RS422
- Input compatibility
- Incremental encoder 10...30 V totem pole
- Input compatibility
- Absolute encoder SSI output 12...25 bits
- Clock frequency
- 200 kHz SSI absolute encoder
- Incremental encoder frequency x1
- 500 kHz
- Incremental encoder frequency x 4
- 250 kHz in input
- Incremental encoder frequency x 4
- 1000 kHz in counting
- Power dissipation in W
- 10...17 W
- Input type
- Resistive servo drive control input conforming to EN/IEC 1131 Type 1
- Input type
- Resistive counter input
- Input type
- Current sink auxiliary input conforming to EN/IEC 1131 Type 2
- Input logic
- Positive
- Input voltage
- 5 V 18 mA counter input
- Input voltage
- 24 V 8 mA servo drive control input
- Input voltage
- 24 V 8 mA auxiliary input
- Input voltage limits
- 19...30 V servo drive control input
- Input voltage limits
- 19...30 V auxiliary input
- Voltage state1 guaranteed
- >= 2.4 V counter input
- Voltage state1 guaranteed
- >= 11 V servo drive control input
- Voltage state1 guaranteed
- >= 11 V auxiliary input
- Current state 1 guaranteed
- > 6 mA auxiliary input
- Current state 1 guaranteed
- > 3.7 mA counter input
- Current state 1 guaranteed
- > 3.5 mA servo drive control input
- Input impedance
- 3000 Ohm servo drive control input
- Input impedance
- 3000 Ohm auxiliary input
- Input impedance
- 270 Ohm counter input
- Number of outputs
- 3 servo drive validation output relay
- Number of outputs
- 3 reflex output static conforming to EN/IEC 61131
- Number of outputs
- 3 analogue output static
- Analogue output range
- +/- 10...24 V
- Analogue output resolution
- 13 bits + sign
- LSB value
- 1.25 mV analogue output
- Output voltage
- 24 V DC servo drive validation output
- Output voltage
- 24 V DC reflex output
- Output voltage limits
- 5...30 V servo drive validation output
- Output voltage limits
- 19...30 V reflex output
- Nominal output current
- 0.5 A reflex output
- Maximum output current
- 625 mA reflex output
- Maximum output current
- 200 mA servo drive validation output
- Maximum output current
- 1.5 mA analogue output
- Minimum load
- 1 mA 1 V
- Output compatibility
- Positive logic DC inputs (resistance
- Short-circuit protection
- Thermal tripping reflex output
- Short-circuit protection
- Current limiter reflex output
- Output overload protection
- Thermal tripping reflex output
- Output overload protection
- Current limiter reflex output
- Output overvoltage protection
- Zener diode between outputs and 24 DC reflex output
- Reverse polarity protection
- Reverse diode on supply reflex output
- Local signalling
- 3 LEDs green axis diagnostics available
- Local signalling
- 1 LED red internal fault, module failure (ERR)
- Local signalling
- 1 LED red external fault (I/O)
- Local signalling
- 1 LED green module operating (RUN)
- Electrical connection
- 3 connectors SUB-D 15 for an incremental or absolute encoder
- Electrical connection
- 2 connectors HE-10 20 pins for aux inputs, reflex output, for external sensor and preactuator power supply
- Electrical connection
- 1 connector SUB-D 9 for an analogue output (speed reference)
- Electrical connection
- 1 connector HE-10 20 pins for servo drive ctrl inputs + for ext power supply of servo drive inputs/outputs
- Current consumption
- 30 mA 24 V DC
- Current consumption
- 22...40 mA 24 V DC on 10/30 V absolute encoder module
- Current consumption
- 1500 mA 5 V DC
- Module format
- Double
- Product weight
- 1.34 lb(US) (0.61 kg)
Environment
- Protective treatment
- TC
- Ambient air temperature for operation
- 32...140 °F (0...60 °C)
- Ambient air temperature for storage
- -13...158 °F (-25...70 °C)
- Relative humidity
- 5...95 % without condensation
Ordering and Shipping Details
- Category
- 22558 - TSX PREMIUM, ATRIUM & PL7 PRO
- Discount Schedule
- PC22
- GTIN
- 00785901105701
- Nbr. of units in pkg.
- 1
- Product availability
- Non-Stock - Not normally stocked in distribution facility
- Returnability
- N
- Country of origin
- FR
Offer Sustainability
- Sustainable offer status
- Not Green Premium product
- RoHS (date code: YYWW)
- Compliant - since 0804 -
- RoHS (date code: YYWW)
- Schneider Electric declaration of conformity
- REACh
- Reference not containing SVHC above the threshold
- Product end of life instructions
- Need no specific recycling operations
Contractual Warranty
- Warranty period
- 18 months
Dokumenty
Data Sheet
PobierzInne kategorie
SiłownikiBlokiKable, rury i wężeSprężarkiSterowanieŁączniki i osprzętCylindry i tłokiElektronikaFiltryHVACKomputery przemysłowe i interfejsy HMIOświetlenieTechnika liniowaSilnikiZasilaniePrzeniesienie napęduPompy i zaworyEnergia odnawialnaRobotykaUszczelki, pierścienie i złączaCzujniki i urządzenia pomiaroweNarzędzia i akcesoriaCNCInne