Neutrik
NC3FXX-EMC
1 / 1
Descrizione
3 pole female EMC-XLR cable connector The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems with radio transmission or mobile phones. The design guarantees a continuous RF shield connection from the cable to the chassis connector housing via a circular capacitor around the cable shield. The circular capacitors act as high-pass filter with a cut-off frequency around 10 MHz. An EMI suppression ferrite bead with 24 Ohm at 1 MHz between pin 1 and the cable screen provides a low-pass filter for improved RF rejection.- Part Number
- NC3FXX-EMC
Metodi di pagamento:
- Migliore offerta da:
Fornitore Automa.Net di fiducia- Disponibilità:
- 3 pz.DisponibileAggiornato il: 22-11-2024
- Garanzia:
- 12 mesi
- Consegna stimata:
- Su richiesta
- Condizione:
- Nuovo sigillato in fabbrica
Nuovo sigillato in fabbrica - Un articolo nuovo di zecca, inutilizzato, non aperto, non danneggiato, nella sua confezione originale sigillata dal produttore.
Informazioni sulla spedizione
Processo di Pagamento Sicuro
Politiche di Reso e Rimborso
Politiche di Spedizione
Politiche di Garanzia
Specifications
- Flammability
- UL 94 HB
- Standard compliance
- IEC 61076-2-103
- Protection class
- IP 40
- Solderability
- Complies with IEC 68-2-20
- Temperature range
- -30 °C to +80 °C
Product Information
- Product Family
- EMC Series
- Title
- NC3FXX-EMC
- Connection Type
- XLR
- Gender
- female
Electric Specifications
- Capacitance between contacts
- ≤ 4 pF
- Contact resistance
- ≤ 3 mΩ
- Dielectric strength
- 1,5 kVdc
- Insulation resistance
- > 10 GΩ (initial)
- Rated current per contact
- 5 A
- Rated voltage
- < 50 V
Mechanic Specifications
- Cable O.D.
- 3.5 - 8.0 mm
- Insertion force
- < 50 N
- Withdrawal force
- < 20 N
- Lifetime
- > 1000 mating cycles
- Wiresize
- max. 0.75 mm²
- Wiresize
- max. 20 AWG
- Wiring
- Solder contacts
- Locking device
- Latch lock
Material
- Boot
- Polyurethan
- Contact plating
- 0.2 µm Au hard alloy over 2 µm Ni
- Contacts
- Bronze (CuSn8)
- Insert
- Polyamide (PA 6.6 30 % GR)
- Locking element
- Zinc diecast (ZnAl4Cu1) / Ck 67 (spring)
- Shell
- Zinc diecast (ZnAl4Cu1)
- Shell plating
- Nickel
- Strain relief
- Polyacetal (POM)
- Circumferential ground spring
- Bronze (CuSn6), Ni plated
