- Circle Diameter Of The Mounting Holes
- 165 mm
- Peak Stall Torque
- 27 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Continuous Power
- 2900 W
- Shaft Diameter
- 24 mm
- Key Width
- 8 mm
- Nominal Output Power
- 860 W 115 V single phase || 1670 W 230 V single phase || 2890 W 400 V three phase || 3170 W 480 V three phase
- Maximum Mechanical Speed
- 4000 rpm
- Mounting Holes Diameter
- 11 mm
- Type Of Cooling
- natural convection
- Maximum Radial Force Fr
- 1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 7.41 kg.cm²
- Number Of Motor Poles
- 5
- Back Emf Constant
- 100 V/krpm 20 °C
- Maximum Axial Force Fa
- 300 N
- Ip Degree Of Protection
- shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 || motor IP65 EN/IEC 60034-5 || shaft bushing IP65 EN/IEC 60034-5
- Shaft End
- parallel key
- Centring Collar Depth
- 3.5 mm
- Nominal Speed
- 750 rpm 115 V single phase || 1500 rpm 230 V single phase || 3000 rpm 400 V three phase || 3600 rpm 480 V three phase
- Electrical Connection
- rotatable right angled connector
- Holding Brake
- without
- Speed Feedback Resolution
- 128 periods
- Stator Resistance
- 1.41 Ohm
- Continuous Stall Current
- 7.8 A
- Nominal Torque
- 10.95 N.m 115 V single phase || 10.6 N.m 230 V single phase || 9.2 N.m 400 V three phase || 8.4 N.m 480 V three phase
- Shaft Length
- 50 mm
- Phase
- three phase
- Length
- 217.5 mm
- Net Weight
- 11.9 kg
- Maximum Current Irms
- 20.8 A
- Torque Constant
- 1.43 N.m/A 120 °C
- Centring Collar Diameter
- 130 mm
- Continuous Stall Torque
- 11.1 N.m 115...480 V three phase
- Stator Inductance
- 23.72 mH
- Motor Flange Size
- 140 mm
- [Us] Rated Supply Voltage
- 115...480 V