- Connection type 1
- Installation side
- Connection technology
- PUSH WIRE®
- Actuation type
- Push-in
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.Using terminal blocks with CAGE CLAMP® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
- Solid conductor
- 1 … 2.5 mm² / 14 … 12 AWG
- Strip length
- 9 … 11 mm / 0.35 … 0.43 inches
- Wiring direction
- Side-entry wiring
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
Fornitore Automa.Net di fiducia
