Thomas & Betts

3/4 in. GUAC Hazardous location Conduit Outlet Box, Box-Ductile Iron-Zinc Plated, Cover-Die Cast Aluminum, 5.3 cu.in.

3/4 Inch Service Entrance Body. For rigid conduit. Zinc.

1-1/2 Inch liquidtight sealing gasket with 316 stainless steel retainer and santoprene sealing material.

Malleable Iron Beam Clamp, Hot Dipped Galvanized. Use with 2 in. conduit or pipe.

Star Teck Extreme hazardous location aluminum jacketed cable fitting, hub size-1-1/2 in.

Compression Coupling, Concrete Tight, Conduit Size 4 Inches, Length 5.395 Inches, Material Zinc Plated Steel, For use with EMT Conduit

Octagon Box, 15.8 Cubic Inches, 4 Inch Diameter x 1-1/2 Inches Deep, 1/2 Inch Knockouts, Pre-Galvanized Steel, Drawn Construction, with Non-Metallic Cable Clamps (C-5) and without Screws, For use with Non-Metallic Sheathed Cable

Hammer Drive pin, shank diameter-9/64", overall length-1/2".

7 Inch. poke-through aluminum cover with brown powder coat finish.

AV Plate, 3 AAP Plates and 2 MAAP Plates, Black Polycarbonate, For Flush Service Round Floor Box, 140 Cubic Inches, Opening Diameter 5-31/32 Inches, Base Diameter 8-1/8 Inches, Depth 6 Inches, 1 Inch and 1-1/2 Inch Conduit Hubs, Non-Metallic, Minimum Concrete Depth Flush 4 Inches Furniture Feed 3-1/2 Inches

Cable Tie 3/4 x 3/4" Mounting Base Natural Nylon 6.6 Adhesive Mounting- For Use with Cable Ties Up to 30 lbs.

FPT Poke-through base unit with (2)-1/2 Inch. and (1)-3/4 Inch. hubs for power and data.

Steel adapter plate for expanded capacity.

1 Inch Insulated Watertight Hub Die Cast Zinc Three Piece Type

Liquid Tight Flexible Metallic Conduit, General Purpose, Galvanised Steel Core with PVC Jacket, Conduit Size 1 Inch, Length 30 Meters/100 Feet, Working Temperature -30 to 80 Degrees C, UL E125517, CSA LR-72635, Compliant to RoHS, Black

Straight Fitting, Fixed External Male Thread, Nominal Conduit Size 21mm, PG16 Thread, Polyamide (Nylon) 66, Grey

Neoprene corrosion resistant boot 1-1/2 in.

Square Box Surface Cover, 7.5 Cubic Inches, 4-11/16 Inch Square x 1/2 Inch Deep, 2-5/32 Inch Diameter Hole, Galvanized Steel, For use with One 30 or 50 Amp Dryer or Range Receptacle, pack of 10, for Retail

2 Inch Form 8 (LU) Conduit Elbow for Use with Rigid/IMC Conduit

2 inch Strain Relief Cord Connector, Straight, for Round Flexible Cord and Power Cable, Neoprene Bushing, Range 1.000 to 1.187 inch (25.4 to 30.15mm)