E2E-X1R5Y1 2M

1 / 1

Part Number: E2E-X1R5Y1 2M

€292.40

net

€324.89

Versand von:

€40.00

1

Zahlungsmethoden:

Bestes Angebot von:: Vertrauenswürdiger Automa.Net Lieferant
Verfügbarkeit:: 2 Stk.
Auf Lager
Aktualisiert am: 19-11-2024
Garantie:: 24 Monate
Geschätzte Lieferung:: 28 November - 02 Dezember zu Vereinigtes Königreich
Zustand:: Neuer Überschuss

Neuer Überschuss - Ein neuer, unbenutzter, unbeschädigter Artikel ohne Herstellergarantie. Der Artikel kann ohne Originalverpackung oder in Ersatzverpackung geliefert werden. Wenn vorhanden, könnte die Verpackung geöffnet worden sein.

Sicherer Zahlungsprozess

Rückgabe- und Erstattungsrichtlinien

Versandrichtlinien

Garantiebedingungen

Ratings / Performance

Type: Shielded
Sensing method: Inductive type
Sensing distance: 1.5 mm-10% to +10%
Setting distance: 0 to 1.2 mm
Differential distance: 10% Max. of sensing distance
Sensing object: Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object: Iron 8 x 8 x 1 mm
Power supply voltage: 24 to 240 VAC
Operating voltage range: 20 to 264VAC
Leakage current: 1.7 mA max.
Control output (Output type): AC 2-wire models
Control output (Switching capacity): 5 to 100 mA
Indicator: Operation indicator (red)
Operation mode: NO
Protective circuit: Surge suppressor
Standard or Different frequency: Standard
Ambient temperature: Operating: -25 to 70 °C
Ambient temperature: Storage: -25 to 70 °C
Ambient humidity: Operating: 35 to 95%RH
Ambient humidity: Storage: 3595%RH
Temperature influence: +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL
Temperature influence: (As the basis for sensing distance of 23 CEL)
Voltage influence: +/- 1% Max. of sensing distance in rated voltage range +/- 15%.
Voltage influence: (As the basis for sensing distance at standard power voltage)
Insulation resistance: 50 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength: 2000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance: 500 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection: IEC60529: IP67
Degree of protection: Company standard: Oil-proof
Connection method: Pre-wired models(Cable length: 2 m)
Weight (Packed state): approx. 60 g
Material (case): Stainless steel (SUS303)
Material (sensing surface): PBT
Material (clamping nuts): Brass nickel plating
Material (toothed washer): Iron zinc plating
Accessories: Instruction manual

Dokumente

Data Sheet

Ähnliche Produkte

H3CA-A

H3DK-M2 AC/DC24-240

Analog Timer, DC24 to 240V, AC24 to 240V

E2E-X7D1-N 2M

Inductive type, Shielded, M18*1mm, DC 2-wire models, Sensing distance 7 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(2 m)

H7ET-NFV1-B

Miniature Time Counter, Time Counter, 48×24×55.5 mm

D4MC-2000

E2E-X2D1-M1G

Inductive type, Shielded, M8*1mm, DC 2-wire models, Sensing distance 2 mm, Operation mode NO, DC 2-wire models with polarity, M12 connector models

E2E-X2D1-N 2M

Inductive type, Shielded, M8*1mm, DC 2-wire models, Sensing distance 2 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(2 m)

H5L-A

Weekly Control with a Large Time Display

D4C1620

Standard sensitivity, IP67, Snap action, Self-reset mechanism, Single-Pole, Double-Throw type, SPDT, Roller lever(38 R), SJT(O) cable approved by UL and CSA 4 cores 3 m

ZC-Q2255

E2E-X1R5E1-M1

Inductive type, Shielded, M8*1mm, DC 3-wire models, Sensing distance 1.5 mm, Operation mode NO, NPN voltage-current output, M12 connector models

D4C-1320

D4C-2220

LY2N DC24

Built-in LED indicator type, Single, Plug-in, Coil ratings: 36.9mA 24VDC , Output DPDT (10A 24V)

E2EX7D1N5M

Inductive type, Shielded, M18*1mm, DC 2-wire models, Sensing distance 7 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(5 m)

D4C-1220-P

Standard sensitivity, IP67 Weather-proof type, Snap action, Self-reset mechanism, Single-Pole, Double-Throw type, SPDT, Roller lever(38 R), VCTF oil-resistant cable 4 cores 3 m

E2E-X5F1-M1

Inductive type, Shielded, M18*1mm, DC 3-wire models, Sensing distance 5 mm, Operation mode NO, PNP voltage-current output, M12 connector models

D4C-1302

MY4H DC24

Hermetic models, Single, Plug-in terminal, 24 VDC 3 A (Resistive load), 110 VAC 3 A (Resistive load), Output 4PDT (3 A 24 V)

E2E-X2D1-N 5M

Inductive type, Shielded, M8*1mm, DC 2-wire models, Sensing distance 2 mm, Operation mode NO, DC 2-wire models with polarity, Pre-wired models(5 m)