H3CA-A

Ratings / Performance

Rated supply voltage

24 to 240 VAC 50/60 Hz

Rated supply voltage

12 to 240 VDC

Operating voltage range

90% to 110% of rated supply voltage (21.6 to 264 VAC/10.8 to 264 VDC)

Power consumption

Approx. 0.2 to 4VA

Power consumption

Approx. 0.2 to 2W

Time ranges(Number of ranges)

7

Time ranges

0.1 s to 99.9 s / 1 s to 999 s / 0.1 min to 99.9 min / 1 min to 999 min / 0.1 h to 99.9 h / 1 h to 999 h / 10 h to 9990 h

Select method

Thumbwheel Switch

Input signals

Start, Reset, Gate, Check

Input method

No-voltage input

Minimum input signal width

0.05 s(Reset, Gate)

Output modes

A (ON delay)

Output modes

B (Repeat cycle)

Output modes

C (Signal ON/OFF delay)

Output modes

D (Signal OFF delay)

Output modes

E (Interval)

Output modes

F (One shot flicker)

Output modes

G (Signal ON/OFF delay)

Output modes

H (Signal OFF delay)

Control output (Contact output)

Type: Time-limit contact: SPDT

Control output (Contact output)

Switching capacities (Resistive load): 3 A at 250 VAC

Control output (Contact output)

Switching capacities (Inductive load): 1 A 250 VAC (cos phi=0.4) / 2.5 A 24 VDC ( L/R=7 ms)

Control output (Contact output)

Minimum applicable load: 10 mA at 5 VDC (failure level: P)

Reset system

Self-reset/External reset

Power reset

Reset time: 0.5 s max.

Display method

LCD

Ambient temperature

Operating: -10 to 55 °C

Ambient temperature

Storag: -25 to 65 °C (with no icing or condensation)

Ambient humidity

Operating: 35 to 85%RH

Ambient humidity

Storag: 35 to 85%RH

Accuracy of operating time

+/- 0.3% +/- 0.05 s (The values are based on the set value.)

Setting error

+/- 0.5% +/- 0.05 s (The values are based on the set value.)

Influence of voltage

+/- 0.3% +/- 0.05 s (The values are based on the set value.)

Influence of temperature

+/- 0.3% +/- 0.05 s (The values are based on the set value.)

Insulation resistance

100 MΩ min. (at 500 VDC)

Insulation resistance

between current-carrying terminals and exposed non-curernt-carrying metal parts / between control output terminals and operating circuit / between non-continuous contacts

Dielectric strength

between current-carrying metal parts and non-curernt-carrying metal parts: 2000

Dielectric strength

between control output terminals and operating circuit: 2000

Dielectric strength

between non-continuous contacts: 1000

Impulse withstand voltage

5 kV

Noise immunity

Between power terminals: +/- 2 kV(0 to 360 degrees)

Noise immunity

Between input terminals: +/- 600 V(0 to 360 degrees)

Noise immunity

Square-wave noise by noise simulator (Pulse width: 100 ns/1 us, Rise: 1-ns)

Vibration resistance (Destruction)

10 to 55 Hz, 0.75 mm single amplitude in each 3 directions for 1 hour

Vibration resistance (Malfunction)

10 to 55 Hz 0.5 mm single amplitude in each 3 directions for 10 min

Shock resistance (Destruction)

1000 m/s**2, in each 6 directions (3 axes) 3 times

Shock resistance (Malfunction)

100 m/s**2, in each 6 directions (3 axes) 3 times

Mechanical life

10000000 operations min. (under no load at 1800 operations/h)

Electrical life

100000 operations min. (3 A at 250 VAC resistive load at 1800 operations/h)

Degree of protection

Panel surface: IP40

Mounting method

Flush mounting / Surface mounting

External connection method

11-pin round socket

Case color

Light gray (Munsell 5Y7/1)

Accessory (sold separately)

Y92A-48D: Soft Cover

Accessory (sold separately)

Y92A-48B: Hard Cover

Accessory (sold separately)

Y92F-30: Flush Mounting Adapter

Accessory (sold separately)

Y92F-70: Flush Mounting Adapter

Accessory (sold separately)

Y92F-71: Flush Mounting Adapter

Weight

Approx. 110g