Búsqueda de productos

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 415 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

CONTACTOR RELAY, 4NO+4NC, AC 110V, 50/60 HZ, SZ S00, SPRING-LOADED TERMINAL, REMOVABLE AUX. SWITCH

Auxiliary switch on the front, 2 NO + 2 NC Current path 1 NO, 1 NC, 1 NC, 1 NO for 3RH and 3RT spring-type terminal .3/.4, .1/.2, .1/.2, .3/.4

Aux.switch block,front,1NC, curr.path 1NC, f. cont. relays a. motor cont., sz s00 and s0, spring-loaded terminal .1 / .2

COUPLING RELAY, AC-3, 3KW/400V, 1NO, DC 24V, 0.7...1.25*US, W. PLUGGED-ON VARISTOR, 3-POLE SZ S00, SPRING-LOADED TERMINAL

Circuit-breaker sz s0, for motor protection, class 10, a-rel. 0.45...0.63a, n-rel.8.2a screw connection, standard sw. capacity w. transverse aux. switch 1NO+1NC

Circuit breaker size S2 for motor protection. CLASS 10 A-release 62...73 A N-release 949 A screw terminal increased switching capacity with transverse auxiliary switches 1 NO+1 NC

Circuit-breaker sz s00, for starter combination, rated current 16a, n-release 208a, screw connection, standard sw. capacity

CONTACTOR, SIZE 2, 2-POLE DC-3 AND 5,RATD.OPERAT.CURR.32A AUXILIARY CONTACTS 22 (2NO+2NC) AC OPERATION AC 230V 60HZ/AC 192V 50HZ

MCB UL489 3-POLE 20A C-TRIP TYPE HSJ MINIATURE CIRCUIT-BREAKER 240 V 14 KA, 3-POLE, C, 20 A, D=70MM ACC. TO UL 489

LEAD ACID BATTERIES MAINTENANCE FREE, SEALED MODULE 24V/15A/2.5 AH WITH SITOP POWER PURE LEAD BATTERY

SINAMICS g120c rated power 3,0KW with 150% overload for 3 sec 3AC380-480v +10/-20% 47-63HZ integrated filter class a i/o-interface 6di, 2do,1ai,1ao safe torque off integrated fieldbus uss/ modbus rtu protection IP20/ ul open type size fsa 196x73x203(hxwxd) external 24v

SINAMICS g120 power module pm240-2 with built in cl. a filter with built in braking chopper 3AC380-480v +10/-10% 47-63HZ output high overload 5,5KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c output low overload 7,5KW for 150% 3s,110% 57s,100% 240s ambient temp -10 to +40 deg c 291 x 100 x 165 (hxwxd), fsb protection IP20 without control unit and panel approved for firmware- version v4.6

SINAMICS G120X Rated power: 11 kW At 110% 60s, 100% 240 s Unfiltered 380-480 V 3 AC +10/-20% 47-63 Hz Ambient temperature -20 to +45 °C Size: FSC Degree of protection IP20 / UL open type Paint finish 3C2 With Intelligent Operator Panel Without IO expansion Fieldbus integrated: PROFINET PN, Ethernet IPSpare part: Only preferred type 6SL3220-3YE26-0UF0. MLFBs within the MLFB 6SL32.0-.YE26-.UF0 can be credited. SIOS 109761925 Spare part: Only preferred type 6SL3220-3YE26-0UF0. MLFBs within the MLFB 6SL32.0-.YE26-.UF0 can be credited. SIOS 109761925

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: MSTB 2,5/..-ST, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard