Búsqueda de productos

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 150A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 175A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 480 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Load disconnector 3LD3, Iu 16 AMain switch 3-pole Ratedoperating capacity at AC-23 Aat 400V 7.5kW Installation indistribution boards, Basicswitch without Knob-operatedmechanism with auxiliary switch

Power contactor. AC-3 300 A. 160 kW / 400 V without coil Auxiliary contacts 2 NO + 2 NC 3-pole. Size S10 Main conductor: Busbar connections Drive: conventional Auxiliary conductor: Screw terminals

Contactor, AC-3, 3KW/400V, 1NC, DC 24V, com. capability 3-pole, sz s00 screw terminal

CONT. F. RAILW. A., AC-3, 5.5KW 400V, DC 110V, 0,7...1,25*US, W.SUPPRESSORDIODE INTEGRATED, 3-POLE, SIZE S00, SPRING-TYPE TERM.

Contactor,AC3 22KW/400V, 1NO+1NC, 110V AC 50HZ, 3-pole, size s2, screw terminal

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V). It provides 24V DC coils with transient suppressor module, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical and electrical interlock. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Contactor relay, 3NO+1NC, DC 24V, sz s00, spring-loaded terminal

Contactor relay, 4NO, AC 42V, 50/60 HZ, size s00, screw terminal

Contactor relay, 7no+1NC, DC 24V, size s00, spring type terminal, permanent aux. switch, for suva applications

Coupl. cont..AC3 37KW/400v. 2NO+2NC. 24 V DC. 3-pole. 3NO. size s3. screw terminals. 1NO+1NC. varistor integr.. perm. mount. aux. switch. suitable for 2a plc-outputs

OVERLOAD RELAY 12.5...50 A FOR MOTOR PROTECTION SIZE S3. CLASS 20E STAND-ALONE INSTALLATION MAIN CIRCUIT: STR.-THR. TRANSF. AUX. CIRCUIT: SCREW TERMINAL MANUAL-AUTOMATIC RESET

Overload relay 32...115 a for motor protection size s3. class 20e f. mounting onto contactors main circuit screw terminal aux. circuit screw terminal manual-automatic reset