Búsqueda de productos

Contactor, AC-3, 7.5KW/400V, 2NO+2NC, DC 24V, w. plugged-in diode assemblies 3-pole, sz s0 spring-loaded terminal permanent aux. switch for suva applications

Contactor,AC3 22KW/400V, 2NO+2NC, 20-33V AC/DC, with varistor, 3-pole, size s2, screw terminal, auxiliary contact inseparable

OVERLOAD RELAY 0.45...0.63 A FOR MOTOR PROTECTION SZ S00, CLASS 10, F. MOUNTING ONTO CONTACTOR MAIN CIRCUIT: RING CABLE LUG AUX. CIRCUIT: RING CABLE LUG MANUAL-AUTOMATIC-RESET

Safety Industrial Relay, 230V 50/60Hz, Standard Contact, 2 NO, 2 NC, Standard Contact

Miniature Contactor, 5 A, IEC, 24 (17...30)V DC Diode, 3 N.O. Poles, 1 N.O. Auxiliary Contact, Screw Type Terminals, Single Pack: Quantityof 1

Undervoltage release UA1 releases the manual motor starter or prevents it from being switched on when its voltage supply is interrupted. This can be used in emergency switching circuits or can prevent an automatic restart after voltage interruption. UA1 is attached laterally on the left side of MS116, MS132 or MS165 manual motor starters.

Load disconnector 3LD3, Iu 16 AMain switch 3-pole Ratedoperating capacity at AC-23 Aat 400V 7.5kW Front platemounting Basic switch w ithCentral hole mounting 22.5mmToggle drive black 48x48 mm

SENTRON, Molded case switch3LD5 UL, Emergencyswitching-off, 4-pole ,certified according to UL489UL60947-4-1 and IEC60947-3, UL:60A, SCCR 50kA at 480VAC,Operating power at 480VAC

AC 50HZ 110V/60HZ 132V AC OPERATION 6NO+2NC, SCREW TERMINALS CONTACTOR RELAY 62E EN 50 011

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 23, number of rows: 1, number of positions: 23, number of connections: 23, product range: MVSTBW 2,5/..-ST, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: -90 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard

Load disconnector 3LD3, Iu 16 AMain switch 3-pole + N Ratedoperating capacity at AC-23 Aat 400V 7.5kW Installation indistribution boards, Basicswitch with selector knob blackInterrupteur-sectionneur 3LD3,

FO converter with SC duplex fiber optic connection (1300 nm), for converting 10/100Base-T(X) to single mode fiberglass (9/125 µm). Auto negotiation and auto MDI(X) function. Comprehensive link diagnostics. DIN-rail mountable, 18 ... 30 V DC supply.

Device connector front mounting, Power, 5-position, Flush-type female connector, straight, M12-Standard, K, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.2 m, 1.31 mm², UL/cUL stranded hook-up wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) 1239550

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 480 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Contactor relay, 4NO, DC 12V, size s00, screw terminal

Contactor, AC-3, 11KW/400V, 1NO+1NC, AC 24v 50HZ, 3-pole, sz s0 screw terminal