Filtros
The PSR-FAN60-105A Accessory Fan is suitable for PSR60…PSR105 Softstarters.
The PSR-FAN60-105A Accessory Fan is suitable for PSR60…PSR105 Softstarters.
Protective cover, type: B10, degree of protection: IP20
Protective cover, type: B10, degree of protection: IP20
Installation connector, Range of articles: PRC 35, Protective cap, housing material: PPE, color: black, rated voltage: 1000. Suitable for couplings (FS)
Installation connector, Range of articles: PRC 35, Protective cap, housing material: PPE, color: black, rated voltage: 1000. Suitable for couplings (FS)
Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Actuation tool, for ST terminal blocks, VDE insulated, with slimmer insulation integrated in the blade, also suitable for use as a bladed screwdriver, size: 0.8 x 4.0 x 100 mm, 2-component grip, with non-slip grip
RJ45 panel mounting frame, IP67, for push-pull interlocking, metal, with the Freenet system, for square panel cutout, with grommet, without mounting screws
RJ45 panel mounting frame, IP67, for push-pull interlocking, metal, with the Freenet system, for square panel cutout, with grommet, without mounting screws
Spacial S3DEX wall mounted steel enclosure with plain door. 300 x 300 x 200 mm. ATEX certified application. Single piece body with clamped blind nut, without mounting plate. Gutter-shaped front rail double sheet thickness. Double bar lock. Steel made, epoxy-polyester powder finish. Protection IP 66 enclosures with single door, IK10, Grey RAL 7035.
Spacial S3DEX wall mounted steel enclosure with plain door. 300 x 300 x 200 mm. ATEX certified application. Single piece body with clamped blind nut, without mounting plate. Gutter-shaped front rail double sheet thickness. Double bar lock. Steel made, epoxy-polyester powder finish. Protection IP 66 enclosures with single door, IK10, Grey RAL 7035.
TeSys enclosed starters, empty enclosure for thermal magnetic circuit breakers GV2ME. Surface mounting enclosure with screw fixing, 2 knock-outs for cable glands on top and bottom, sealable cover. Polycarbonate enclosure, double insulated with protective conductor, IP55 protection, for environment temperature less than 5°C. To be equipped with a motor circuit breaker GV2ME, and start-emergency stop buttons GV2K (to be ordered separately). Possible mounting of 1 side auxiliary contact blocks GVAD, GVAM, GVAD on both sides of GV2ME (to be ordered separately). It conforms to IEC 60947-2 and IEC 60947-4-1, Green Premium compliant (RoHS/REACh).
TeSys enclosed starters, empty enclosure for thermal magnetic circuit breakers GV2ME. Surface mounting enclosure with screw fixing, 2 knock-outs for cable glands on top and bottom, sealable cover. Polycarbonate enclosure, double insulated with protective conductor, IP55 protection, for environment temperature less than 5°C. To be equipped with a motor circuit breaker GV2ME, and start-emergency stop buttons GV2K (to be ordered separately). Possible mounting of 1 side auxiliary contact blocks GVAD, GVAM, GVAD on both sides of GV2ME (to be ordered separately). It conforms to IEC 60947-2 and IEC 60947-4-1, Green Premium compliant (RoHS/REACh).
This Acti9 accessory is a set of 10 end-caps. It is designed to cover the side of a comb busbar 3P. The product color is yellow.
This Acti9 accessory is a set of 10 end-caps. It is designed to cover the side of a comb busbar 3P. The product color is yellow.
Spacial SF suitable steel enclosure with 2 plain front doors. 2200 x 1200 x 800 mm. Assembled. Screw fixed rear panel. Without mounting plate. 4-point closure system with handle and 5 mm double bar lock insert. Galvanised steel for frame and uprights. Protection IP 55, IK10, Grey RAL 7035. 4 mounting plate support brackets included.
Spacial SF suitable steel enclosure with 2 plain front doors. 2200 x 1200 x 800 mm. Assembled. Screw fixed rear panel. Without mounting plate. 4-point closure system with handle and 5 mm double bar lock insert. Galvanised steel for frame and uprights. Protection IP 55, IK10, Grey RAL 7035. 4 mounting plate support brackets included.
Magnet coil for contactors s2, 110V AC 50/60HZ
Magnet coil for contactors s2, 110V AC 50/60HZ
SIMATIC hmi memory card sd card 2 gb for SIMATIC hmi comfort panel
SIMATIC hmi memory card sd card 2 gb for SIMATIC hmi comfort panel
Pressing tool, Crimping tool for wire-end ferrules, 0.25mm², 6mm², Trapezoidal indentation crimp
Pressing tool, Crimping tool for wire-end ferrules, 0.25mm², 6mm², Trapezoidal indentation crimp
TeSys GV manual self protected combination starters meet the requirements of UL 508 Type F, see UL File E164871. Manual motor starter consists of a GV2 motor starter protector and a LC1D IEC contactor assembled together into one device. This enclosure is for GV2ME manual starters and protectors with or without accessories Enclosure is flush mounting with front face reduced. Auxiliary contacts can only be added on the right hand side of the GV2ME. The enclosure rating is NEMA 1 and IP41. Enclosure is 5.24 inches tall, 3.66 inches wide and 3.86 inches deep. This enclosure is not UL listed, but is CSA certified.
TeSys GV manual self protected combination starters meet the requirements of UL 508 Type F, see UL File E164871. Manual motor starter consists of a GV2 motor starter protector and a LC1D IEC contactor assembled together into one device. This enclosure is for GV2ME manual starters and protectors with or without accessories Enclosure is flush mounting with front face reduced. Auxiliary contacts can only be added on the right hand side of the GV2ME. The enclosure rating is NEMA 1 and IP41. Enclosure is 5.24 inches tall, 3.66 inches wide and 3.86 inches deep. This enclosure is not UL listed, but is CSA certified.
Spacial S3D wall mounted steel enclosure with plain door. 1200 x 600 x 300 mm. Single piece body, without mounting plate. Robust construction based on a new design. 3-point closure system with handle and 3 mm double bar lock insert. Steel made, epoxy-polyester powder finish. Gutter shaped front rail double sheet thickness. Protection IP 66, IK10, Grey RAL 7035. 1 cable gland plate included, standard. Extensive range of accessories. Packaging is reusable after assembly.
Spacial S3D wall mounted steel enclosure with plain door. 1200 x 600 x 300 mm. Single piece body, without mounting plate. Robust construction based on a new design. 3-point closure system with handle and 3 mm double bar lock insert. Steel made, epoxy-polyester powder finish. Gutter shaped front rail double sheet thickness. Protection IP 66, IK10, Grey RAL 7035. 1 cable gland plate included, standard. Extensive range of accessories. Packaging is reusable after assembly.
Spacial SF wall mounting fixing supports. . Multi-purpose application. Mounting on roof of enclosure. Fixing by screws type M12 roof fixing point location. Steel made, zinc coated surface finish. Set of 2.
Spacial SF wall mounting fixing supports. . Multi-purpose application. Mounting on roof of enclosure. Fixing by screws type M12 roof fixing point location. Steel made, zinc coated surface finish. Set of 2.
This Harmony XACA03H7 is a empty pendant control station with 3 vertical openings for control circuit. This yellow control station is double insulated and its enclosure material polypropylene. It is part of the range Harmony XAC pendant control stations for diameter 22mm plastic signaling units.
This Harmony XACA03H7 is a empty pendant control station with 3 vertical openings for control circuit. This yellow control station is double insulated and its enclosure material polypropylene. It is part of the range Harmony XAC pendant control stations for diameter 22mm plastic signaling units.
This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 10A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 4mH. It weighs 3kg and its dimensions are, 130mm wide, 155mm high, 90mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 10A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 4mH. It weighs 3kg and its dimensions are, 130mm wide, 155mm high, 90mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.