Búsqueda de productos

20B, 85 A 45 kW, 400V AC Three-Phase, IP20/NEMA/UL 1, Vector Ctrl W/ 24V I/O, No Feedback, No HIM - Blank Plate, No Communication Module, W/ EMC Filt & ComModeChoke, Without Brake IGBT, No Internal Brake Resistor, Size 4 Frame, No Custom Firmware, Documentation

AC Drive, 5.5 kW (7.5 HP), 480V AC Input, 3 PH, 50-60 Hz, 13 A Output, IP20, UL-NEMA Type Open, Panel Mounting, With Brake IGBT, Frame C, 0.98PF, Integral Keypad With Potentiometer And Led Display, RS485, Fixed Terminal Block Connections.

SIRIUS safety relay basic unit advanced series with time delay 0.05-3s relay enabling circuits 2 instantaneous no contacts 2 delayed no contacts us = 24 V DC screw terminal

Smart Motor Controller, 85A, 480V, 3-Phase, 50/60Hz, 100...240V AC, Open

20B, 34 A at 25 Hp, 480V AC Three-Phase, IP20/NEMA/UL 1, Vector Ctrl W/ 120V I/O, No Feedback, No HIM - Blank Plate, No Communication Module, W/ EMC Filt & ComModeChoke, Brake IGBT Installed, No Internal Brake Resistor, Size 2 Frame, No Custom Firmware, Documentation

SINAMICS g120c rated power 18,5KW with 150% overload for 3 sec 3AC380-480v +10/-20% 47-63HZ unfiltered i/o-interface 6di, 2do,1ai,1ao safe torque off integrated fieldbus PROFIBUS-dp protection IP20/ ul open type size fsc 295x140x203(hxwxd) external 24v

PF525 Control Module

SIRIUS soft starter s2 63 a, 30 KW/400 V, 40 ¦c 200-480 V AC, 24 V AC/DC spring-type terminals

2x13.0 Arms continuous, 2x32.0 Arms Peak output current - AdvancedSafety

Shunt Resistor, Kinetix 300/350, 75 Ohm

AC Drive, 1.5 kW (2 HP), 240V AC Input, 1 PH, 50-60 Hz, 8.0 A Output, IP20, UL-NEMA Type Open, Panel Mounting, With Internal CECompliantFilter, Omit Brake IGBT, Frame B, 0.98 PF, Integral Keypad With Potentiometer And Led Display, RS485, Fixed Terminal BlockConne

AC Drive, 0.75 kW (1 HP), 240V AC Input, 1 PH, 50-60 Hz, 4.2 A Output, IP20, UL-NEMA Type Open, Panel Mounting, With Internal CECompliantFilter, Omit Brake IGBT, Frame A, 0.98 PF, Integral Keypad With Potentiometer And Led Display, RS485, Fixed Terminal BlockConn

AC Drive, 0.2 kW (0.25 HP), 240V AC Input, 1 PH, 50-60 Hz, 1.6 A Output, IP20, UL-NEMA Type Open, Panel Mounting, Omit Brake IGBT, FrameA, 0.98 PF, Integral Keypad With Potentiometer And Led Display, RS485, Fixed Terminal Block Connections.

20A, 3.5 A at 1.5 kW, 400V AC Three-Phase, IP20/NEMA/UL 1, No Feedback, No HIM - Blank Plate, No Communication Module, W/O EMC Filt & ComModeChoke, Brake IGBT Installed, No Internal Brake Resistor, A Frame, Enhanced Control with 24V I/O, Documentation

AC Drive, 5.5 kW (7.5 HP), 480V AC Input, 3 PH, 50-60 Hz, 13 A Output, IP20, UL-NEMA Type Open, Panel Mounting, With Brake IGBT, WithIntegralEMC Filter, V Per Hz-Sensorless Vector-Closed Loop Vector-Perm Magnet Motor Control, Safe Torque-Off PID-SIL2 Cat 3, Safe Tor

The softstarter PSE105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

20A, 43 A at 22 kW, 400V AC Three-Phase, IP20/NEMA/UL 1, No Feedback, No HIM - Blank Plate, No Communication Module, W/ EMC Filt & ComModeChoke, Brake IGBT Installed, No Internal Brake Resistor, D Frame, Enhanced Control with 24V I/O, Documentation

SINAMICS G120C RATED POWER 0,55KW WITH 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ INTEGRATED FILTER CLASS A I/O-INTERFACE: 6DI, 2DO,1AI,1AO SAFE TORQUE OFF INTEGRATED FIELDBUS: PROFIBUS-DP PROTECTION: IP20/ UL OPEN TYPE SIZE: FSA 196X73X203(HXWXD) EXTERNAL 24V

Kit, Encoder Interface, 5V OR 12V DC, Differential Only, Internal Mount